EB137CD For your safety General Power Tool Safety Warnings WARNING! WARNING! Before using the garden tool, read Read all safety warnings and all instruc- and follow: tions. Failure to follow the warnings and these operating instructions, – instructions may result in electric shock, fire the user instructions of associated/ –...
EB137CD If operating a power tool in a damp location Do not use the power tool if the switch does is unavoidable, use a residual current not turn it on and off. Any power tool that device (RCD) protected supply. Use of an cannot be controlled with the switch is RCD reduces the risk of electric shock.
EB137CD Before starting the unit Under abusive conditions, liquid may be ejected from the battery; avoid contact. If Before starting work, familiarise yourself contact accidentally occurs, flush with with the unit and its functions as well as its water.
Page 6
EB137CD Do not switch on the motor until your feet Use only the cutter bar, which are intended are at a safe distance from the cutter bar. for this lawnmower. Be careful and do not reach into the ...
EB137CD Safety instructions for Li-ion Technical specifications batteries Do not open the battery. Appliance Lawnmower There is a risk of a short-circuit. Protect the battery from heat, e.g. from EB137CD Type continuous exposure to sunlight, fire, Nominal voltage water and humidity.
EB137CD Instructions for use Before initial operation Assembling Unpack the garden tool and accessories WARNING! and check that no parts are missing or Before performing any work on the garden damaged. tool, remove the safety key. NOTE Attaching the handlebar The batteries (optional;...
EB137CD Assembling the grass catcher Align the holes on the handlebar and the machine. Insert the silver screws Insert the two lower parts together until it clicks (1.). through the holes and tighten up (3, 4). Turn in the two srews at the bottom (2.).
EB137CD Adjusting the cutting height Inserting/replacing the battery The cutting heigt can be varied in 5 steps Charging the battery as described in the from 25 mm (1) to 75 mm (5) with the cutting user manual of the charger.
EB137CD Switching on/off the power tool Battery state of charge Press the button to check the state of Switching on charge at the state of charge indicator LEDs. Press the switch interlock and hold down (1). Pull back the the On/Off lever towards the handlebar (2).
EB137CD Maintenance and care Working with the mulch plug WARNING! When you need to mulch, simply Before performing any maintenance and detach the grass catcher and attach cleaning work on the garden tool, remove the mulch plug as illustrated. the battery.
Page 14
EB137CD Repairs Disposal information Check the unit for damage. Repairs may be WARNING! carried out by an authorised customer Render redundant garden tools unusable: service centre only. mains operated tool by removing the – Storage power cord, battery operated tool by removing the General informations –...
EB137CD Guarantee This product has been manufactured to the highest quality standards. When a new product is purchased, it is guaranteed a 24-month manufactu rer’s warranty which comes into force on the date the product was purchased. The guarantee covers only...
Need help?
Do you have a question about the EB137CD and is the answer not in the manual?
Questions and answers