Make sure the connector on the battery is aligned properly to the plug in the fuselage. Take care not to force the battery in the fuselage. Use only the supplied battery or ERC replacement part. Other batteries may damage the radio system.
Binding the Model Your model is shipped ready to fly. If you find the ontrols are not responding to the transmitter, it may be necessary to bind the radio system. Use the following to bind the radio system. 1. Turn on the transmitter 2.
Setting the trim before flight It may be neccessary to fine trim your model before flight, with all transmitter sticks in neutral all control surfaces should be at neutral position. ✔ ✖ DIGITAL TRIMS: CH2: Elevator trim buttons (+ for up and - for down) CH3: Throttle trim buttons (+ for increase and - for decrease) CH4: Rudder trim buttons...
You can also take off from the ground on smooth surfaces such as gym floors or driveways. The Micro Stik can be flown mild or wild. Slowly cruise around at 1/4 throttle or perform multiple loops and tight turns at higher power settings.
The product team at J Perkins hopes that you enjoy your new Micro Stik. Whether flying in your outdoors or indoors we think that the Micro Stik is a model that you’ll be proud to show off to your friends and flying buddies.
Safety Instructions for Charging and Using Li-Poly Batteries • Do not put the battery on, or near anything, that can catch fire when charging. • Always charge the battery on a non-flammable base, i.e. a metal tray. • Do not disassemble the battery. •...
Page 8
Have Fun! We hope that you have many pleasant flights with your Micro Stik! J Perkins Distribution, Lenham, UK www.jperkinsdistribution.co.uk V7.10...
Need help?
Do you have a question about the Micro Stik and is the answer not in the manual?
Questions and answers