Table of Contents
Advertisement
Operating Instructions
BEFORE FIRST USE
1. Carefully unpack your Toaster and remove all packaging materials.
2. To remove any dust that may have accumulated during packaging,
simply wipe the Toaster exterior with a clean, damp cloth.
3. Do not use abrasive cleansers.
4. Do not put the Toaster, cord or plug in water.
SELECTING TOAST COLOR
The Color Control knob is located on the front of your Toaster.
Simply turn the arrow on the knob to the desired toast color: LIGHT
(#1) is for warming and very light toasting; DARK (#5) for dark
toasting. Turn the Color Control to the left for LIGHT toast (#1) or
to the right for DARK toast (#5). The numbers are a guide to help
you select your desired color (the higher the number, the darker the
toast). The first time you toast, it is best to position the Color Control
at the middle of the range (#3); then adjust each subsequent toasting
to your preference.
CANCEL BUTTON: At any time during the toasting process, you may
press the Cancel Button to end the toasting function and cause the
bread to pop up.
Toasting Instructions
1. Place Toaster on a flat, level surface.
2. Plug cord into a 120 V 60 Hz outlet. The unit may emit an odor
and/or smoke during the first few uses from oils used in
manufacturing. This is normal for a new appliance.
3. Adjust the Color Control to the desired lightness or darkness.
For the first use, set the Color Control to medium (#3).
4. Remove all protective wrappings from food before placing in
Toasting Slot(s). Avoid toasting torn slices of bread and broken
pastries, which may get lodged in Toasting Slot(s).
5.
Advertisement
Table of Contents
