Summary of Contents for COLORADO NVVN621
- Page 1 NVVN621 video tilted line generator s/n_______________ april 2010...
- Page 2 WARNING This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual, may cause interference to radio communications. It has been tested and found to comply with the limits for a class A computing device pursuant to subpart of J of part 15 of FCC Rules, which are designed to provide reasonable protection against such interference when operated in a commercial environment.
- Page 3 TABLE OF CONTENTS Section I GENERAL DESCRIPTION Page Introduction Purpose of Equipment Description of Equipment Specifications Section II OPERATING INSTRUCTIONS 2.1. Introduction Installation and Operation Operation Section III WARRANTY...
- Page 4 TV camera and monitor. DESCRIPTION OF EQUIPMENT The Model NVVN621 accepts composite video input, adds lines to the video and provides a composite video output for display on a standard TV monitor. The position of the lines can be varied over 90% of the raster width using the front panel controls.
- Page 5 Connect a camera or other source of a composite video signal to the “input” connector on the rear of the NVVN621. Connect a composite video monitor to the “output” connector. Connect the coaxial power input to a regulated 5VDC, >900mA, (12VDC for “Opt-12 models) center pin positive power source.
- Page 6 , which shall within one (1) year after delivery to the original purchaser be returned to Colorado Video, Incorporated at its laboratories, with transportation charges prepaid, and which Colorado Video, Incorporated’s examination shall disclose to its satisfaction to have been defective.
Need help?
Do you have a question about the NVVN621 and is the answer not in the manual?
Questions and answers