Troubleshooting - Vax V-084B Series Instruction Manual

V-084B Series User Guide.qxd:V-084B Infinity User Guide
vax.co.uk
The amount of steam generated can be adjusted by the
knob at the front of the steamer (Fig.4/4).
Fig.4/4
When not in use (ie. during warm up or cool down after
use) the steam trigger can be locked by sliding the
safety catch to the right (Fig.4/5).
Fig.4/5
Please note the indicators at the base of the unit:
The right LED illuminates when the steamer is on. The
left LED illuminates when the steamer is ready to use
(Fig.4/6).
Fig.4/6
6
preparation / troubleshooting
All manuals and user guides at all-guides.com

5. Troubleshooting

checks.
PROBLEM: Appliance does not start.
Cause:
Solution:
Cause:
Solution:
Cause:
Solution:
Cause:
Solution:
PROBLEM: No steam
Cause:
Solution:
PROBLEM: Water runs out from the nozzle.
Cause:
Solution:
Cause:
Solution:
Cause:
Solution:
PROBLEM: Water 'cooks' during filling.
Cause:
Solution:
PROBLEM: Accessory comes loose.
Cause:
Solution:
PROBLEM: All solutions exhausted, but steamer is
Cause:
Solution:
6/5/09 16:20
WARNING: To reduce the risk of personal
!
injury, unplug the vacuum cleaner before
performing maintenance or troubleshooting
Not properly plugged into electrical outlet.
Plug in firmly.
No electricity in electrical outlet.
Check fuse or breaker.
Internal fuse blown.
Have the fuse changed by a qualified
electrician.
No water in reservoir.
Fill water reservoir.
No water in reservoir.
Fill water reservoir.
Too much water in the reservoir.
Reduce water in the reservoir.
Appliance tilted too far
Hold appliance in an upright position.
Appliance not hot enough.
Let the appliance heat up for longer before
depressing the steam trigger.
Water reservoir still hot.
Allow to cool before filling.
Accessory not correctly attached
Refer to user guide for correct fitting
information.
still not working.
Appliance may be damaged.
Contact the Vax Careline.
Page 6