Download Print this page

Product Care And Maintenance - Baby Plus Rocco Assembly And Instruction Manual

Advertisement

Available languages

Available languages

ATTENTION! Important safety information!
IMPORTANT:
Read the instruction manual carefully, so that the safety of your child is not
impaired. Keep the instruction manual for future reference. The child could become injured,
if this manual is not observed.
Check before assembly if the product or any parts have been damaged during transport.
Suitable only for children who can sit autonomously. Approximately an age of 6 months.
Not suitable for children who can walk autonomously or who weigh more than 12 kg.
The product is not suited for children taller than 85 cm
WARNING:
Never leave the child unattended!
The running trainer should only be used for approx. 20 minutes.
Avoid access to stairs, steps, and inclined areas.
WARNING:
Your child has a larger action radius in the children running trainer and can
move faster than before.
Check the wear condition of the product regularly.
In no case use continue the use of the damaged product. Keep it out of children's reach.
WARNING:
Remove and dispose all plastics bags and elements that are part of the
packaging or in any case keep out of children's reach – danger of suffocation!
The assembly of the product must only be conducted by an adult.
Take care that your child never comes near any heat source or oven with the Baby-Walker.
Keep hot beverages, electronic appliances and other sources of danger away from
your child.
Avoid bumping the Baby-Walker against glass (doors, windows, furniture, etc.).
Do not use the Baby-Walker if parts are damaged or missing
WARNING:
Only assemble accessories or component parts that are intended for this product
by the manufacturer.
Should you have any questions about the Baby-Walker or you need accessories,
please contact the specialist retailer where you have bought your Baby-Walker.

PRODUCT CARE AND MAINTENANCE:

Do not use the Baby-Walker if parts are damaged or missing.
Arrange for replacement or repair before re-using the Baby-Walker.
Clean the plastic parts including the stoppers with a moist cloth.
Dry wet metal parts to control corrosion.
If the product is exposed to direct sunlight for a long time, the parts can bleach out.
GB
9

Advertisement

loading