Advertisement
Quick Links
www.lightemotion.com.au
DMX36
Basic controller for RGBWAUV HEX 6-in-1 LED Fixtures
User's instruction manual
This manual contains important information about the safe installation and use of this product
Please read this instruction manual carefully before installing or operating
Please keep these instructions in a safe place for future reference
V1.01
Advertisement
Summary of Contents for Light Emotion DMX36
- Page 1 DMX36 Basic controller for RGBWAUV HEX 6-in-1 LED Fixtures User’s instruction manual This manual contains important information about the safe installation and use of this product Please read this instruction manual carefully before installing or operating Please keep these instructions in a safe place for future reference...
- Page 2 Introduction Thank you for the purchase of your DMX36 basic LED DMX controller by Light Emotion. We are confident you will be satisfied with your purchase and enjoy many years of use from this Professional Light Emotion product. Please read these instructions carefully to ensure the product is well look after and used correctly to avoid any potential problems.
- Page 3 It will control any 6-in-1 RGBWAUVLED fixture that has a DMX profile with the six colours running over 6 channels where each channel represents a colour – red, green, blue, white, amber and UV. Each fixture needs to be in DMX mode, and set 6 channels apart. 3.
- Page 4 Press 1,2,3,4,5,6 buttons and the corresponding LED above the button will light indicates which LED fixtures are controlled by HEX LED controller now. Each button indicates to the corresponding fixture. For example: Press button 1 one time, the LED above the button will light indicates that fixture 1 can be controlled by HEX LED controller now;...
- Page 5 Red, Green, Blue, White, Amber buttons to select your preferable built in chase program. Once the chase program has been selected, you can use Speed fader to adjust the chase program speed, use Fade Time fader to adjust the fade time, use Master Dimmer fader to control all the LEDs intensity, use UV Dimmer fader to control the UV LEDs intensity, use White Dimmer fader to control the white LEDs intensity, use Amber Dimmer fader to control the amber LEDs intensity.
- Page 6 Now if you press the Strobe button, the LED above the button will be on, the controller will switch on the strobe with the fixed strobe speed which user had set before. For stop the strobe press the button again, the LED above the button will be off. 8) Preset mode In any working mode, keep pressing Preset buttons more than 3 seconds to save the current scene in the Preset button, less than 3 seconds to call the scene has been saved in the Preset button.
- Page 7 Date Purchased:_________________________________________ Invoice/Receipt Number:__________________________________ Copyright Light Emotion 2017. E&OE * Exclusively imported by LSW Imports and Distribution * PO Box 887, Kingsgrove, NSW, 2208 * 1800 643 111 (within Australia) * +612 9718 4900 (outside of Australia) sales@lswonline.com.au * www.lightemotion.com.au...