Advertisement
5.
MAINTENANCE
WARNING! Disconnect grinder from air supply before changing accessories, servicing or
performing maintenance. Replace or repair damaged parts. Use genuine parts only. Unauthorised parts may be dangerous
and will invalidate the warranty.
5.1.
If the air supply system does not include an oiler lubricate the air grinder daily with a few drops of sealey air grinder oil
dripped into the air inlet to prolong its life.
5.2.
Clean the grinder after use.
5.3.
Loss of power or erratic action may be due to the following:
a) Excessive drain on the air line. Moisture or restriction in the air pipe. Incorrect size or type of hose connectors. To
remedy check the air supply and follow instructions in chapter 3.
b) Grit or gum deposits in the grinder may also reduce performance. If your model has an air strainer (located in the area
of the air inlet), remove the strainer and clean it. Flush the grinder out with gum solvent oil or an equal mixture of sAE
No 10 oil and paraffin. Allow to dry before use.
5.4.
For a full service contact your local sealey service agent.
5.5.
When not in use, disconnect from air supply, clean grinder and store in a safe, dry, childproof location.
Risk of Hand Arm Vibration Injury.
The sA12/s.V2 Medium stroke Air hammer, when operated in accordance with these instructions and tested in accordance with
EN 28662-2: 1994 results in the following vibration emission declared in accordance with Bs EN12096: 1996.
Measured vibration emission value: ...................... 1.6m/s²
These values are suitable for comparison with emission levels of other tools that have been subject to the same test.
This tool may cause hand-arm vibration syndrome if its use is inadequately managed.
Recommended Measures to reduce risk of hand-arm vibration syndrome: This item represents a low hand Arm Vibration
risk to users. The calculated maximum usage period exceeds 8 hours. We recommend appropriate safety equipment is utilised
and regular breaks for the operator are employed to reduce any residual risk of fatigue or repetitive strain injury.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
Sole UK Distributor, Sealey Group,
Kempson Way, suffolk Business Park,
Bury st. Edmunds, suffolk,
IP32 7AR
Original Language Version
Uncertainty: ........................................... 0.64m/s²
01284 757500
01284 703534
www.sealey.co.uk
Web
sales@sealey.co.uk
email
sA719
Issue: 3 - 16/12/11
Advertisement
