Table of Contents
Advertisement
Basic Operation
Picture Freeze Function
Press the FREEZE button on the remote control to freeze the picture
on the screen. To cancel the FREEZE function, press the FREEZE
button again or press any other button.
Recall Function
Press the RECALL (
selected channel position, Color system, and SIF system in TV mode
and the selected input mode in video or computer mode. Press the
RECALL (
) button again to make it disappear while the indication is
on the screen.
NOTE:
Holding down the RECALL button for more than 2 seconds brings you to Channel Block
Setting mode. (See p32 for detail on the operation.)
On Timer Function
The On Timer function is provided to turn on the LCD Projection TV
automatically and select a desired input mode.
Select an input mode that you want to view when the LCD
1
Projection TV is turned on automatically.
2
Press the ONTIMER button on the remote control. Initial
setting time "1:00" will be displayed and the ONTIMER
indicator will light yellow.
3
Press the ONTIMER button repeatedly until your desired
time is displayed. The time changes as follows:
⇒ 1:00 ⇒ 2:00 ⇒ 3:00 ⇒ 4:00 ⇒ 5:00 ⇒ 6:00 ⇒ 0:00 ⇒
⇐ 0:00 ⇐12:00 ⇐11:00 ⇐ 10:00⇐ 9:00 ⇐ 8:00 ⇐ 7:00 ⇐
4
Turn off the LCD Projection TV by pressing the POWER ON-
OFF button on the remote control or the front control.
When the selected time has elapsed, the LCD Projection TV
is automatically turned on from the stand-by mode with the
input mode selected and the ONTIMER indicator turns off.
When the LCD Projection TV is operating under the On Timer function is set.
When the selected time has elapsed, the input mode will be
changed to the one you select when setting the On Timer
function and the ONTIMER indicator turns off.
18
) button on the remote control to display the
Remote Control
OK
ON
TIMER
AUDIO-S VIDEO-S S.SYS C.SYS
LAMP
SCREEN AUTO PC FREEZE
MODE
Remote Control
(FRONT)
TV
VIDEO3
VIDEO 1
VIDEO2
PC 1
PC 2
A・B SURROUND
The indication disappears after 5 seconds.
OK
Remote Control
MENU
TV MENU
OK
ON
TIMER
AUDIO-S VIDEO-S S.SYS C.SYS
The indication disappears after 5 seconds.
NOTE:
When 3 hours has elapsed with no operation of the remote
control or the front control after the LCD Projection TV is
automatically turned on, the message "No operation: Power
off." will be displayed and then the LCD Projection TV be
turned off. (p53)
To cancel the On Timer setting, press the ONTIMER button on
the remote control repeatedly until "0:00" is displayed and the
ONTIMER indicator turns off.
FREEZE button
RECALL button
ON TIMER button
Advertisement
Table of Contents
