Advertisement
Connect the Battery Eliminator to the
2
Vehicle Power Supply
Connect the Battery Eliminator to your vehicle's 12 V DC power socket (cigarette lighter or similar).
a
Connect the Cigarette Socket Adapter or the Bare Wire Connector into the vehicle's 12 V DC power
socket.
1 Cigarette Socket Adapter
2 Bare Wire Connector
Note
If installing the Bare Wire Connector type, follow good wiring practices and connect it to a fused connection
point on the vehicle electrical fuse block. The positive lead (red wire) contains the fuse holder.
b
Check that the LED indicator of the Power Adapter is lit in green.
Printer
1 LED Indicator
Note
If the LED is lit in red:
a) Disconnect the printer from the power supply.
b) Turn off the vehicle power.
c) Reconnect the printer to the power supply.
If the LED color is still red, contact your local Brother dealer.
2
1
1
Vehicle's 12 V DC
Power Socket
Vehicle Power Supply
2
2
2
Advertisement
