Summary of Contents for IBS BK 50
- Page 1 Translation Original Operating Instructions IBS-Parts Cleaner Type BK 50 IW/V4.0/10-2012/EN...
- Page 2 IBS Scherer GmbH Head-Office in Gau-Bickelheim All devices have been tested and certified! Please visit our website: www.ibs-scherer.de Operating Instructions IBS-Parts Cleaner Type BK 50 (IW/V4.0/10-2012/EN) Page...
-
Page 3: Table Of Contents
6.4. Notes on Personal Protective Gear ..............9 Inspection / Maintenance ................... 9 7.1. Inspection ......................9 7.2. Maintenance ......................9 Spare Parts and Accessories ..................9 Appendix_________________________________________________ Appendix 1 Declaration of Conformity for Type BK 50 Operating Instructions IBS-Parts Cleaner Type BK 50 (IW/V4.0/10-2012/EN) Page... -
Page 4: About The Machine / Technical Data
Pressure connection: 1/8“ 2. Proper use and foreseeable misuse __________________ The IBS-Parts Cleaner Type BK 50 has been designed for cleaning oily and greasy metal parts (e.g. machine parts, motors and housings) using IBS-Special Cleaners. 2.1. Approved Solvents Solvents used with this machine must not contain halogenated hydrocarbons and must meet... -
Page 5: Function
Once the cleaning effectiveness of the Special Cleaner is reduced, the 50l-solvent drum needs to be replaced. IBS Scherer will take back used drums containing waste solvent and recycle the liquid providing the customer has not introduced other (chemical) materials. -
Page 6: Transport
A professional electrician must perform the installation of electrical supplies for the customer. DANGER The electrical supply line is to be installed in accordance with all regulations and the information (technical data) in the instruction manual. Operating Instructions IBS-Parts Cleaner Type BK 50 (IW/V4.0/10-2012/EN) Page... -
Page 7: Prevention Of Electrostatic Charge
• Please contact IBS Scherer GmbH if you have any queries regarding disposal. • IBS Scherer will take back used drums containing waste solvent and recycle the liquid providing the customer has not introduced other (chemical) materials. -
Page 8: Operating The Machine
• Use the brush to clean the workpiece. • Release the foot switch to turn the pump off. NOTICE Please complete and sign the attached warranty card and return it to IBS Scherer GmbH. Operating Instructions IBS-Parts Cleaner Type BK 50 (IW/V4.0/10-2012/EN) -
Page 9: Finding And Troubleshooting Problems
7. Inspection / Maintenance _____________________________ 7.1. Inspection An experienced IBS trained technician should inspect the unit at least every 12 months. The examination of the IBS Parts Cleaning Devices, as stationary or moveable electrical devices, has to be effected by the operator. - Page 10 BGV A1 Prevention Principles BGV A8 Graphical safety and risk prevention symbols for use at the work place Authorized for collecting all technical documentation: Mr. Torsten Bodtländer, IBS-Scherer GmbH, Gewerbegebiet, 55599 Gau- Bickelheim 23.10.2012 ___________________________________ Date Axel Scherer, MSc. (General Manager) If the above named equipment is modified without our consent, this declaration is no longer valid.
Need help?
Do you have a question about the BK 50 and is the answer not in the manual?
Questions and answers