George Home Wooden tree house Assembly Manual

Wooden tree house
Assembly Guide
IMPORTANT: RETAIN FOR FUTURE REFERENCE
WARNINGS:
• IMPORTANT SAFETY INSTRUCTIONS
• PLEASE READ ALL INSTRUCTIONS CAREFULLY
BEFORE USE AND RETAIN FOR FUTURE
REFERENCE.
• Adult assembly required.
• The hardware contains small screws with sharp points.
Keep unassembled parts out of the reach of small
children.
• WARNING! Not suitable for children under the age of 36
months. Components of this product may break off into
small parts presenting a choking hazard.
• Choking hazard: Unassembled parts may be a choking
hazard to children 3 years and younger.
• To avoid the danger of suffocation, keep any bags
or packaging away from babies and children. Any
packaging or bags are not part of the toy and must be
disposed of immediately before assembling the toy.
• DO NOT SIT OR STAND ON THIS TOY.
GEORGE Wooden Tree House.indd 1
You will need...
Cross head / Philips
screwdrivers suitable for
use with the screws and
bolts provided.
Getting started...
1. Unpack the 2. Place the
components and components on
check against the a clean surface
list below. to prevent them
from being
damaged.
You will have...
A x1 I x1
B x1 J x1
K x1
C x1
D x1 L x1
E x1 M x1
F x1 N x1
G x1 O x6
H x2 P x3
Step 1
Attach the two
side panels (A
& B) to the back
panel (C) using two
small screws (O)
and a cross head
screwdriver.
3. After you have
assembled your
toy, dispose of all
packaging.
Step 2
Attach the roof
(D) to the side
panels using two
small screws (O)
and a cross head
screwdriver.
Step 3
Attach the front
of the roof (E) to
the assembled
sections using two
small screws (O)
and a cross head
screwdriver.
Step 4
Slot the two
sections of the tree
(F & G) together as
shown.
Slot one of the
supports (H) on the
outer branch of the
tree.
G
B
C
A
O
D
O
E
O
F
H
11/06/2015 08:13