Ironing With Extra Steam - Toastmaster 3314 Use And Care Manual

6. You may still use the spray or burst of steam buttons as long as there is
water in the tank.
7. When finished, turn temperature control dial to MIN, lowest setting,
and unplug. Allow the iron to cool before cleaning the exterior or
storing.
NOTE: During ironing, the ready light may turn on again which indicates
that the iron is heating up to maintain the proper temperature.
CAUTION: If the iron has been used for a long time and is hot, DO NOT
fill it with water.
USING AS A STEAM IRON
When using as a steam iron, be sure the temperature setting on the
temperature control dial is within the STEAM range to avoid water spotting
on a garment.
1. Position temperature control dial to MIN, lowest setting. Diagram 2.
2. Position the variable steam dial to lowest setting. Diagram 3.
3. With the unit UNPLUGGED, fill the iron with water. (See FILLING THE
WATER TANK instructions.)
4. Stand the iron on its heel in an upright position on an iron-safe surface
and plug in.
DIAGRAM 4
5. Turn the temperature control dial to STEAM. Diagram 2.
6. Allow approximately 2 minutes for the iron to reach the desired
temperature. (The ready light will turn off.)
7. Turn the variable steam dial counter clockwise to the desired amount of
steam. Diagram 3. As soon as the iron is held horizontally, steam will
flow through the vents. If the iron fails to steam, gently tap the soleplate
on the ironing surface. Placing the iron on its heel in an upright
position interrupts the flow of steam.
8. When finished, turn temperature control dial to MIN, lowest setting,
and unplug. Allow to cool before cleaning the exterior of the iron or
storing.
CAUTION: Avoid coming in contact with escaping steam.

IRONING WITH EXTRA STEAM

For a penetrating burst of steam to iron faster and to smooth difficult
DIAGRAM 5
5