The heater must be installed at least 2m above the floor. Do no discard of any packaging until you have checked that you have all of the parts and fittings required. If the product is damaged or has any defects, please contact cservice@oypla.com USER MANUAL Model No: 4219...
Operating Instructions If you are missing any of the below parts please contact cservice@oypla.com Please be aware that you will be referring to this parts list throughout the assembly process. Installation Drill two holes on the wall at least 2m above the floor and 20mm from any corners. Drill the two holes 385mm apart and ensure the hole is the same diameter as the rawl plug.
Please contact your local authority for further details of your nearest designated collection point. Penalties may be applicable for incorrect disposal of this waste, in accordance with your national legislation. USER MANUAL Model No: 4219...
Need help?
Do you have a question about the 4219 and is the answer not in the manual?
Questions and answers