Usb To Dvd-Rom - Naxa NMT-1100 Instruction Manual

Make sure that the AV signal source is connected before you start recording. If it isn't,
"AV is not ready," will appear on the display screen. Do not disconnect the signal source
while the recording is being processed.

2. USB to DVD-ROM

2.1 Insert the DVD disc correctly and then connect the USB drive. Enter
the main menu and select "Video/USB/Card
navigation buttons.
2.2 Press ENTER and Video/USB/Card will appear.
www.naxa.com
Low Quality
Card
Card
Card
Card
DVD" by using the
Page 11