Advertisement
Setting Programmes
1. Enter the programme mode by pressing P.
2. By using the + and – buttons you can select the day or days you want to programme.
The display will scroll through the days or group of days you want to programme.
1,2,3,4,5,6,7 (Monday to Sunday so you can different programmes for each day) 15 days 1-5, 67 days 6-
7,16 days 1-6 and 17 days 1-7 (the display will be flashing the radiator symbol
symbol flashing
for ECO/Comfort programming.
3. When you have reached the day or group of days you wish to programme press P.
4. The display will show the first ON time, set the on time using + and – buttons.
5. Press the P button, the display will show the first OFF time.
6. You can programme 4 on times and 4 off times using the procedure above.
If you don't want to use all the on/off times make sure they are set showing the same times.
Programming group days will override and single day settings.
If you wish to exit programming at any point press P for 3 seconds.
Press
P
use + and -
to set off time
use + and -
Press
to set off time
P
Press
P
Override
By pressing the
button the central heating will be over ridden.
So if the central heating is off it will be turned on, and if the central heating is on it will be turned off. This
will stay in this mode until the programmer reaches its next timed setting.
use + and -
to select day(s)
Press
P
use + and -
to set on time
If no further times required
set on/off times the same
) Day 17 with the tap
Press
use + and -
P
to set on time
use + and -
Press
to set on time
P
Press
P
Press
P
S.Melbourne 08/12/06
Press
P
use + an -
to set off time
Press
P
Advertisement
