Glasdon SIGNMASTER LED Instructions

SIGNMASTER LED 24V INSTALLATION KIT INSTRUCTIONS
Ensure that personnel carrying out this conversion have the relevant qualifications/certificates and all work
!
is carried out in accordance with BS6771:2008/I.E.E. Wiring Regulations 17th Edition.
Ensure that all relevant personnel read the points listed within this leaflet and that a copy is given to staff
involved with the installation and maintenance of this product.
Glasdon recommends that a full Health and Safety analysis is carried out prior to installation.
KIT CONTENTS
1
- Signmaster Bollard
2
- M10 x 100 Screw
3
- M10 x Ø50 White Washer
4
- Spacer
5
- Gasket
6
- LED Housing
7
- Concrete-In Plate
8-
M10 x 70 Hex Head Bolt
9
- M10 x Ø50 Silver Washer
10
- Concrete-In Bars
11
- IP68 Plug
Allen Key 6mm
Optional Extras
Installation Lid
EQUIPMENT REQUIRED
-Ø17mm Spanner/Socket
-Spade
-Spirit Level
-Support Block x2
-Concrete Mix (we suggest using a quick setting
concrete i.e. QC10 in areas prone to vandalism).
MINIMUM HOLE DIMENSIONS
x1
x4
x4
x1
x1
x1
x1
x4
x4
x2
x1
x1
100mm Angled Bend
Diagram A
Please note that diagrams are not to scale
1
1
2
3
4
5
6
7
8
9
10
11