Maintenance - Olympus M.ZUIKO DIGITAL MC-20 Instructions Manual

• Do not leave the lens without the cap. If solar
light is converged through the lens, a fire may
result.
• Do not point the camera lens at the sun.
Sunlight will converge in the lens and focus
inside the camera, possibly causing a
malfunction or fire.
Handling the teleconverter and lens
• More than one MC-20 cannot be used at a
time. The MC-20 also cannot be used with
another lens converter at the same time.
• Do not hold only the camera body without
holding the lens. The splashproof and optical
performance may be compromised.
• Do not touch the electrical contacts on the
teleconverter.
• Olympus has no responsibility for the use
of this product, which may be prohibited
by regulations in countries or regions other
than the country or region in which it was
purchased.

Maintenance

Blow any dust off the lens with a commercially
available blower.
Technical Support (U.S.A./Canada)
24/7 online automated help :
http://www.olympusamerica.com/support
Phone customer support :
Tel.1-800-260-1625 (Toll-free)
Our phone customer support is available
from 9 am to 9 pm (Monday to Friday) ET
E-Mail : distec@olympus.com
• European Technical Customer Support
Please visit our homepage
http://www.olympus-europa.com
or call: Tel. 00800 - 67 10 83 00 (Toll-free)
+49 40 - 237 73 899 (Charged)
For customers in Europe
This symbol [crossed-out wheeled
bin WEEE Annex IV] indicates
separate collection of waste
electrical and electronic equipment
in the EU countries.
Please do not throw the equipment
into the domestic refuse.
Please use the return and collection
systems available in your country
for the disposal of this product.
7
EN