LG CineBeam PH450U Owner's Manual page 102

• Expert Pattern
Patterns used for expert adjustment.
• Color Filter
Filters a specific color spectrum in RGB colors to fine-tune color saturation and
hue accurately.
• Color Temperature
Expert
In mode, you can customize the options of each mode.
Gamma: Select 1.9, 2.2, or 2.4.
- a. Method: 2 Points
• Pattern: Inner,
• Points: Low,
• Red/Green/Blue: The adjustment range for each color is from -50 to +50.
• Apply to all
the input modes.
- b. Method: 20 Point IRE
• Pattern: Inner,
• IRE
(Institute of Radio Engineers) is the unit indicating the size of a video
signal and can be set to 5,10,15, ... 100. You can fine-tune for each setting
as shown below.
•
Luminance: The adjustment range is 50 to 500.
• Red/Green/Blue: The adjustment range is -50 to +50.
• Apply to all
the input modes.
• Color Management System
Adjusts Red/Green/Blue/Cyan/Magenta/Yellow colors. Allows an expert to
adjust the tint using a test pattern. Six colors (Red/Green/Blue/Cyan/Magenta/
Yellow) can be selectively adjusted without affecting other colors. You may not
see colors change on a normal picture even after adjustment.
Saturation Red/Green/Blue/Cyan/Magenta/Yellow,
-
Blue/Cyan/Magenta/Yellow,
Yellow: The adjustment range is -30 to +30 each.
* Depending on input signal or other picture settings, the range of detailed items
for adjustment may differ.
Outer
High
inputs: The values of the
Outer
inputs: The values of the
Luminance
Color Temperature
Color Temperature
Tint Red/Green/
Red/Green/Blue/Cyan/Magenta/
49
is applied to all
is applied to all