LITEWAY LuxLink OC-1002 Operating Instructions

WARRANTY
All fiber optic transmission systems, products and accessories
manufactured by Liteway, Inc. and it's subsidiaries are fully tested
prior to shipment and are warranted against defective materials
and workmanship for a period of five full years from the date of the
original shipment. Should a problem occur, a Return Material
Authorization Number (RMA) must be obtained from Liteway Inc.
at (516) 931-2800 and the item returned to Liteway, Inc. 166
Haverford Road, Hicksville, NY 11801, USA, prepaid. Liteway Inc.
will then, at its option repair or replace the defective item.
Liteway, Inc. maximum liability under this warranty is limited to the
cost of the defective item only. No contingent liabilities of any kind
are either assumed or implied.
Any items returned to Liteway, Inc. that have been misused,
abused, damaged, modified, connected or adjusted in any way
contrary to the instructions furnished by Liteway, Inc. or repaired
by unauthorized personnel will not be covered by this warranty.
Any non-warranty repairs required will be quoted at the current
rate for such services.
!
Important Notices
CAUTION ! AVOID DIRECT EXPOSURE TO BEAM.
All -7,-8, and -9 Models use laser diodes. These solid-state laser
diodes are located in the optical ports of these units. Laser diodes
produce invisible radiation that may be harmful to human eyes.
Never look directly into the optical port of any fiber optic unit
designed to operate with single-mode optical fiber.
NOT FOR LIFE SUPPORT SYSTEMS
Liteway, Inc. does not authorize or warrant any of its products or
accessories for use in critical life support systems or applications
of any kind.
© Copyright 2017 Liteway, Inc. 106155 Rev E
OPERATING INSTRUCTIONS
®
LuxLink
Fiber Optic
Optical Coupler/Splitter
Model OC-1002
The OC-1002 Fiber Optic Optical Coupler consists of a 1 x 2 optical
coupler. The unit is designed for use as an optical splitter or
combiner to implement a single-fiber bi-directional transmission
system.
Technical Specifications
Operating Wavelength 850 - 1310 (for -1, -3 models)
1310 -1550 (for -7 ,-9 models)
Fibers Accommodated Multimode (for -1, -3 models)
Single-mode (for -7, -9 models)
Optical Connectors ST (for -1, -3 models)
FC/PC (for –7 ,-9 models)
Insertion Loss Common 4 dB Typical
to or from A or B
Insertion Loss A to 20 dB Minimum
from B
Temperature Range -35º to +75ºC
Power Requirements None
Physical Size (mm) 5.0"(127)L x 1.0" (25.4)W x
3.0"(7)D
All specifications are subject to change without prior notice.