Connect Power Supply To Base; Dock The Headset - HAMECO HS-9000 User Manual

HS-9000 User Manual

3.2. CONNECT POWER SUPPLY TO BASE

1. Plug the power adapter into the port marked
2. Connect the power adapter to the main power socket.

3.3. DOCK THE HEADSET

1. Press the Multiple function button, it will be powered on
after the LED light shines for 2 seconds. Press the Multiple
function button again or dock the headset with the base,
then lift the headset. The headset with the paired light
will light up when the headset and base are connected.
2. When docked correctly the headset battery will begin charging, if need-
ed (LED will flash when charging
battery indicator on the base
3. Clear the paired base: Press R+ at the back of the base, the battery
charging status light will flash 3 times.
4. Renew the headset pairing: consistently press the PAGE switch for
5 seconds, the headset with the paired light
the headset. Consistently press the headset mute button until the
headset status LED flashes, then the headsets are in paired status. Con-
nection will be successful when the LED powers off at the same time.
is a steady green.
www.hameco-headset.com
on the base.
). Charge for 20 minutes or until the
will flash to search for
8