Additional Features - Morphy Richards 44099 Manual

44098-9MCZ:9225 47507 MEE pump - Jon

ADDITIONAL FEATURES

Using the re-heat
button
If your toast has popped up and
gone cold, the toaster offers a re-
heat facility. To use, depress the
relevant bread carriage lever and
press the re-heat button ›
immediately. The button will
illuminate and the toaster will
operate for a short period re-heating
the bread.
Using the frozen
button
To toast frozen bread do not adjust
the browning control from your
normal setting. Place the bread in
the bread slots as normal, and
press the frozen button ‹.
Using the cancel
button
If you wish to interrupt the toasting
process, press the cancel button fi.
Hints and tips
• In order to achieve uniform
browning, we recommend you wait
a minimum of 30 seconds between
each toasting, so that the control
can be automatically reset.
• If toasting one slice only, you may
need to adjust the browning control
to a slightly lower setting.
• Note you will also notice a slight
variation in toast colour on one side
of a single slice.
• Stale bread toasts more rapidly than
fresh bread. Therefore, the browning
control should be set at a lower
setting than usual.
• All sorts of bread can be used as
well as teacakes, small rolls etc.
Slices should not however be so
thick as to cause burning or
jamming within the bread slots.
• If the bread in your toaster becomes
jammed disconnect your toaster at
the socket, allow it to cool, then
remove the bread.
7/1/08 10:16 Page 5
• When toasting 2 or more slices it is
recommended they are of equal size
and freshness.
• Allow the toaster to cool fully before
putting away.
Cleaning and
maintenance
1 After use and before cleaning,
switch off at the mains, remove the
plug from the wall socket and wait
for the toaster to cool.
2 Wipe the outside of the toaster with
a damp cloth only and dry with
another cloth or tissue.
• NEVER use metal polish or coarse
scouring agents and never immerse
your appliance in any sort of liquid.
• NEVER use any pointed or sharp
articles for cleaning the inside,
otherwise the heating element will
be damaged.
• NEVER use a brush or push your
fingers or metal objects down the
slots.
Crumb tray
A
WARNING: Crumbs will
accumulate in the crumb tray
and could catch fire if not
emptied regularly.
When the appliance has cooled
down completely, tap the sides of
the case lightly to dislodge any
crumbs lodged in the appliance
chamber and remove the crumb tray
‡. Empty the tray and replace it.
Never operate the appliance without
the crumb tray fitted.
HELPLINE
If you have any difficulty with your
appliance, do not hesitate to call us.
We are more likely to be able to
help than the store from where you
bought it.
Please have the following
information ready to enable our staff
to deal with your query quickly.
A
g
5