Operating Instructions - Stagg BLAXX FLANGER Quick Start Manual

Thank you for purchasing our Flanger Pedal.
Before operating this product, please
read the enclosed Operation Instructions

OPERATING INSTRUCTIONS

9
5
3
8
1. True BYPASS Footswitch
Push down on the footswitch to switch between effect
and bypass status.
2. LED Indicator
On: effect is active. Off: bypass mode is active.
3. RATE
Adjusts the flange rate. Turn clockwise to increase,
and anti-clockwise to decrease.
4. RANGE
6
Controls the range of flange sweep.
5. COLOR
Controls the depth of the flange sweep.
4
6. FLANGER SWITCH
Switch between 'normal' and 'filter' sweep.
7. INPUT
Connect your guitar or other effect unit to the standard
Ø 6.3 mm INPUT jack of the pedal.
7
8. OUTPUT
Connect the output of your pedal to your amp
or other effect unit using the standard Ø 6.3 mm
OUTPUT jack.
2
9. 9V POWER ADAPTER INPUT
Connect your 9V DC regulated power supply adapter
plug here (negative polarity) (not included).
!
Use only the specified AC adaptor and connect
1
it to an AC outlet of the correct voltage.
Do not use any other AC adaptor, since this
may cause malfunction.