Higdon Outdoors FLASHER XS Instructions

FLOATING / SPLASHING
FLASHER
instructions

INCLUDED PARTS:

[A] Splashing Flasher Body
[B] Large Wings
[C] Wing Weights
[D] ON / OFF Toggle Switch
[E] Floating Base
[F] Bilge Pump*
(Splashing Flasher Only)
[G] Anti-Flip Counter Weight
[H] 12v Battery Charger with
Port Adapter

INTERNAL PARTS:

#3 Timer (where applicable)
12V Battery (3 amph)
Quick Connect Cables

INSTRUCTIONS FOR USE:

1. Twist decoy body coutner clockwise to open (Fig. I)
2. Connect the two battery quick connect cables securely (Fig J). Each
connection is designed to only clip one way, eliminating confusion. Line
up tabs and press firmly.
3. Firmly press decoy body into floating base, ensuring locking guides are
properly aligned. Twist clockwise to lock. When assembled properly,
feet should be lined up in relation to body. (Fig. I)
4. Attach wings (printed side up) by lifting the spring loaded wing stud and
insert the wing shaft into the socket, ensuring wing is secure. (Fig. K)
5. Turn ON/OFF toggle switch to "ON" position to operate spinning wings
and bilge pump*. (Fig. L)
6. Minimum of 8oz weight for decoy anchor is recommended at
applicable depth.
Find us online!
ww w.h i g d o n o u td oo r s . c o m
HIGDON_flasher_instructions.indd 1
G
*(Splashing Flasher Only)
QUESTIONS?
270-443-8739
A
B
C
H
CALL!
D
E
F
I
J
K
L
5/27/17 1:53 PM