Table of Contents
Advertisement
Quick Links
Please dispose of packaging for the product in a responsible
manner. It is suitable
environment, take the packaging to the local amenity tip and
place into the appropriate recycling bin.
FOR HELP OR ADVICE ON THIS PRODUCT PLEASE CONTACT YOUR DISTRIBUTOR,
OR SIP DIRECTLY ON:
TEL: 01509500400
EMAIL: sales@sip-group.com or technical@sip-group.com
www.sip-group.com
Ref: 301014
for recycling.
Help to protect the
20
500kg Fast Lift
Transmission Jack
03690
Please read and fully understand the instructions in this manual
before operation. Keep this manual safe for future reference.
1
Advertisement
Table of Contents
Summary of Contents for SIP 03690
- Page 1 Help to protect the environment, take the packaging to the local amenity tip and place into the appropriate recycling bin. FOR HELP OR ADVICE ON THIS PRODUCT PLEASE CONTACT YOUR DISTRIBUTOR, OR SIP DIRECTLY ON: 03690 TEL: 01509500400 EMAIL: sales@sip-group.com or technical@sip-group.com www.sip-group.com...
- Page 2 LE12 9NH England As the manufacturer's authorised representative within the EC declare that the 500kg Fast Lift Transmission Jack - SIP Part. No. 03690 Conforms to the requirements of the following directive(s), as indicated. 2006/42/EC Machinery Directive And The Relevant Harmonised Standard/s, Including EN 1494+A1:2008 Signed: …………………………………...
-
Page 3: Table Of Contents
NOTES CONTENTS Page No. Description Safety Symbols Used Throughout This Manual Safety instructions Contents & Accessories Guarantee Specifications Assembly Instructions Getting to Know Your Transmission Jack Operating Instructions Maintenance Troubleshooting Exploded Drawing Parts list Notes Declaration on conformity... -
Page 4: Safety Symbols Used Throughout This Manual
SIP recommends that this transmission jack should not be modified or used for any application other than that for which it was designed. This transmission jack is designed as an aid in the removal and installation of a trans- mission or a differential as individual components. - Page 5 NOTES SAFETY INSTRUCTIONS….cont tidy and free from unrelated materials and ensure that there is adequate lighting. DO NOT dismantle or tamper with the transmission jack, as this may be dangerous and will invalidate the warranty. WARNING! Do not allow untrained persons to operate the transmission jack and do not operate the transmission when under the influence of drugs or alcohol.
-
Page 6: Contents & Accessories
GUARANTEE This SIP hydraulic transmission jack is covered by a 24 month parts and labour warranty covering failure due to manufacturers defects. This does not cover failure due to mis- use or operating the jack outside the scope of this manual - any claims deemed to be outside the scope of the warranty may be subject to charges Including, but not limited to parts, labour and carriage costs. -
Page 7: Specifications
PARTS LIST SPECIFICATIONS Ref No. Description SIP Part No. Ref No. Description SIP Part No. Bolt (M8 x 40) HY01-00385 Screw protector HY01-00412 Release valve handle HY01-00386 Screw HY01-00413 Nut M8 HY01-00169 O-ring HY01-00414 Base for handle HY01-00387 Screw HY01-00415... -
Page 8: Assembly Instructions
ASSEMBLY INSTRUCTIONS EXPLODED DRAWING 1. Locate the two leg stands. 2. Connect both leg stands to the bottom base using the four M12 x 25 bolts with 4 x 12mm washers and 4 x 12mm spring washers supplied. 3. Fit the four castors to the ends of the leg stands using the M12 domed nuts with 12mm washers &... - Page 9 TROUBLESHOOTING OPERATING INSTRUCTIONS PRIOR TO FIRST USE Symptom Possible fault Solution Lack of oil Refill with oil After assembly, leave the jack to stand for one hour to allow the oil to settle before Can`t reach full height purging the system. Trapped air Bleed system Low oil level...
- Page 10 OPERATING INSTRUCTIONS….cont MAINTENANCE….cont SLOWLY and CAREFULLY turn the release valve handle to the right to lower the load to its lowest possible position. Warning: Do Not use brake fluid or any other improper fluid and avoid mixing different types of oil when adding hydraulic oil. Note: The speed of descent is controlled by the release valve handle;...
Need help?
Do you have a question about the 03690 and is the answer not in the manual?
Questions and answers