Advertisement
Quick Links
Specification
Color
Type
Dimension
Weight
Form Factor
5.25" Drive Bays
3.5" Drive Bays
Expansion slots
Cooling system
I/O panel
Power supply
Option
Production specifications are subject to change without notice.
Black and Silver
A381 Standard, A381 VFD, A381 iMON, A381 LCD
W 430 X H 100 X D 405 (mm)
Standard
Net Weight:7.6 Kg, Gross Weight: 8.6 Kg
VFD
Net Weight:7.6 Kg, Gross Weight: 8.6 Kg
iMON
Net Weight:7.0 Kg, Gross Weight: 8.6 Kg
LCD
Net Weight:8.0 Kg, Gross Weight: 9.0 Kg
Micro-ATX/ATX/E-ATX
1 Exposed
2 Hidden
4 low profiles
2 standard PCI with riser card
Dual 6 cm blue LED fan, 1500 rpm, 19dBA
USB 2.0 X 2, MIC X 1, Audio X 1, Card reader X 1, IR X 1
Flex-ATX 270 W
Bluetooth & Wireless board, Bluetooth & Wireless Antenna
Advertisement
Summary of Contents for GlacialTech Altair A381 Series
- Page 1 Specification Color Black and Silver Type A381 Standard, A381 VFD, A381 iMON, A381 LCD W 430 X H 100 X D 405 (mm) Dimension Weight Standard Net Weight:7.6 Kg, Gross Weight: 8.6 Kg Net Weight:7.6 Kg, Gross Weight: 8.6 Kg iMON Net Weight:7.0 Kg, Gross Weight: 8.6 Kg Net Weight:8.0 Kg, Gross Weight: 9.0 Kg...
-
Page 2: Part List
1.1 Diagram 1.2 Part list Item Parts Name Q’ty Casing Top cover Front panel I/O cover CD-ROM holder HDD holder Case fan Power supply DVD plate Media hot keys > 6 Vfd or iMON or LCD... - Page 3 1.3 Accessory Figure Parts Name Q’ty Used for #6-32 screws M/B tray, HDD tray M3 screws CD-ROM DVD plate with EVA plate CD-ROM plate Remote control (Vista MCE or iMON) Control HTPC AAAA Batteries Remote control IR Blaster with bracket IR learning Altair A381 Quick Guide User quick manual...
- Page 4 AC’97 AC’97 connector Azalia (Intel High Definition Audio) HD connector Front panel USB connector Card reader connector 2.2 MCE Remote Controller Guide (A381 standard, A381 VFD version) Your remote controller has five types of buttons: Navigation buttons, to move between items on the screen. (for example, up arrow or enter) Playback buttons, to control your media (for example, pause or stop) Audio-visual (AV) and power buttons, to change channels and adjust volume.
- Page 5 Command Task Icon START Takes the user to the Windows Media Center Start menu Moves the focus point up one position DOWN Moves the focus point down one position LEFT Moves the focus point to the left one position RIGHT Moves the focus point to the right one position Performs the action at the focus point BACK...
- Page 6 2.2.3 Audio-visual and power buttons Use the AV and power buttons to change channels, adjust volume, access a DVD menu, or to put Media Center in standby mode. Command Task Icon PC POWER Puts the Windows Media Center computer into standby mode if the (STANDBY) computer is running.
- Page 7 to delete characters you have typed, press CLEAR; press ENTER to submit the characters you have typed. You can also use the numeric keypad to enter TV channels. 2.3 VFD Installation Guide (A381 VFD version) Please connect your VFD module to USB2.0 port on the motherboard and also connect power to VFD device as showing below.
- Page 8 3. On the remote control for Media Center PC, press and release the TV Power, VOL+, VOL-, Numeric keypads (0 through 9), CH+, CH-, or Mute button, depending on which command you want it to learn. The remote control for Media Center PC Green LED blinks once to confirm the selection. In the learning setup mode, Red LED blinks quickly four times when two conditions occurring: (Try again, repeat steps 1 to 3) If you press other buttons than TV Power, VOL+, VOL-, Numeric keypads (0 through 9), CH+, CH-, and...
- Page 9 The names of the additional USB port pins on the Motherboard manual are different with the manufacture. Please refer to the following table to connect the USB cable After all the connection finished, turn on your system. You may see the “Found New H/W Wizard” when Windows starts.
- Page 10 1. Application Exit : Closing the active window or Closing Multi Median. <ALT+F4> 2. Power : Turn On/OFF the system. 3. Media Control Button group 1. Play/Pause/Open/Prev./Next/Rew./F.Fwd/Stop 4. Mouse/Keyboard button : Switching the usage of PAD controller between mouse and keyboard 4 way arrow keys. 5.
- Page 11 2.6.2 Dual Monitor Setting for Frontview In order to use iMON OEM Touch LCD and FrontView application properly, please make setting of your display as like below before you install the iMON/iMEDIAN software installation. 1. Connect VGA cable of iMON OEM Touch LCD to secondary VGA port on your computer. 2.
Need help?
Do you have a question about the Altair A381 Series and is the answer not in the manual?
Questions and answers