Advertisement
4.5" Replacement LED Auxiliary Lights
HE-BAL451 (Black Front Face)
HE-SAL451 (Silver Front Face)
Applications: Motorcycles with a 4.5"
round Auxiliary Lights
Tools Needed – Phillips Screwdriver
Refer to the motorcycle's instructional manual for proper
For most applications follow these steps:
1. Remove trim ring (if applicable) by removing (1) Phillips
screw at bottom of trim ring.
2. Unplug the motorcycle's harness from the auxiliary light
and remove light.
3. Plug the harness into the new HEISE LED auxiliary light.
There are some applications where the HEISE auxiliary
for Motorcycles
Instructions:
auxiliary light removal.
Advertisement
Table of Contents
Summary of Contents for Heise HE-BAL451
- Page 1 1. Remove trim ring (if applicable) by removing (1) Phillips screw at bottom of trim ring. 2. Unplug the motorcycle’s harness from the auxiliary light and remove light. 3. Plug the harness into the new HEISE LED auxiliary light. There are some applications where the HEISE auxiliary...
-
Page 2: Specifications
If that is the case then connect the BROWN wire of the HEISE auxiliary light to the (+) wire and the BLUE wire to the (-) wire of the motorcycles auxiliary lighting harness. 4. Install light and replace trim ring (if applicable).
Need help?
Do you have a question about the HE-BAL451 and is the answer not in the manual?
Questions and answers