Advertisement
WARM STEAM & COOL MIST
Cordless Inhaler
FOR MODEL: EE-5948
If you have any questions about the operation of your
inhaler, please contact Crane Customer Care.
Toll Free: 888-599-0992
Email:
customer-service@crane-usa.com
Register your product online
https://crane-usa.com/product-registration/
PLEASE READ AND SAVE ALL INSTRUCTIONS TO ENSURE
THE SAFE AND EFFECTIVE USE OF THIS INHALER.
SAVE YOUR DATED PROOF OF PURCHASE!
Advertisement
Summary of Contents for Crane Warm Steam and Cool Mist EE-5948
- Page 1 WARM STEAM & COOL MIST Cordless Inhaler FOR MODEL: EE-5948 If you have any questions about the operation of your inhaler, please contact Crane Customer Care. Toll Free: 888-599-0992 Email: customer-service@crane-usa.com Register your product online https://crane-usa.com/product-registration/ PLEASE READ AND SAVE ALL INSTRUCTIONS TO ENSURE THE SAFE AND EFFECTIVE USE OF THIS INHALER.
- Page 2 [ You will need this in case of warranty ] staple tape or paperclip your receipt HERE Register your product online https://crane-usa.com/product-registration/...
-
Page 3: Table Of Contents
P. 8 Warranty P. 9 CRANE & SUSTAINABILITY Crane USA is dedicated to your environment both inside and outside your home. We know if cleaned and maintained properly, our products last for years helping to reduce unnecessary use of resources and emissions making new products. -
Page 4: Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS WARNING! READ AND SAVE THESE INSTRUCTIONS. Failure to follow all of the instructions listed below may result in electric shock, fire and/or serious personal injury. 1. DO NOT use this unit for any purpose other than described in this manual or packaging. 2. - Page 5 AC ADAPTOR The AC Adaptor charger included with the Crane Warm Steam and Cool Mist Inhaler is 100- 240V 50/60 Hz and can be used worldwide. However, in some countries you may need to use an outlet adaptor.
-
Page 6: List Of Main Parts & Technical Specifications
LIST OF MAIN PARTS Fig. 1 (Inhaler) 1. Water Reservoir 2. Nebulizer 3. Power Button 4. Indicator Lights 5. Plug Port 6. Vapor Pad Chamber Fig. 2 (Other Parts) 7. Latex Free Silicone Mask (2) (Dishwasher Safe) 8. Vapor Pads (5) 9. -
Page 7: Assembly & Use
Please Note: Do NOT add essential oils into the water reservoir. This inhaler is designed to be used with Crane Vapor pads ONLY. Do NOT dispense medicine in the inhaler. Replace: Place the body of the steam inhaler unit on the water reservoir then turn the reservoir to secure it onto the inhaler. - Page 8 Refill the reservoir if it is out of water. Vapor Pad Chamber (for use with Crane HS-1948 Vapor Pads) Prior to running the inhaler, remove the silicone mask and slide pad into chamber before running inhaler. Replace silicone mask onto the inhaler. Change vapor pad with each session.
-
Page 9: Maintenance & Storing Your Inhaler
MAINTENANCE Cleaning and disinfecting on a regular basis is important for maintaining the performance of your inhaler. IMPORTANT: Water left in the reservoir when not in use may result in buildup of bacteria which may inhibit the output efficiency as well as void the warranty. If water remains in the Water Reservoir for more than a day or two, bacterial growth is possible. -
Page 10: Customer Care & Trouble Shooting
LIVE CHAT: available at www.crane-usa.com TROUBLESHOOTING DO NOT attempt to repair the inhaler yourself. If the inhaler continues to not operate, please contact Crane Customer Care. Problem Solution Power Indicator Lights The battery needs to be charged. Plug in the inhaler and ▪... -
Page 11: Warranty
L I M I T E D W A R R A N T Y Thank you for purchasing a Crane product which has been tested to meet our stringent quality standards. This product is warrantied to be free from manufacturing defects under normal use and conditions for 1 year.
Need help?
Do you have a question about the Warm Steam and Cool Mist EE-5948 and is the answer not in the manual?
Questions and answers