Advertisement
Advertisement
Table of Contents
Summary of Contents for widmer E-3
- Page 3 OPERATING INSTRUCTIONS MODEL 776-E EMBOSSER/IMPRINTER The Model 776-E is a hybrid between an electric seal embossing machine (raised imprinting on document) and a validation stamp (Text, signature and sometimes date, number or time &date printed through a single or multi-colored ribbon). If your unit is equipped with date / or date and time.
- Page 4 ROTATE. Replace bottom cover, turn the unit upright, plug it in and stamp it. Repeat if necessary. Widmer Time Recorder Co., Inc. Manufacturing Plant and Service Center: 228 Park Street, Hackensack, New Jersey 07601 Tel: (201) 489-3810 (in New Jersey) Fax: (201) 489-3478 (800) 424–4459 (Outside New Jersey)
- Page 5 TO SET THE DATE: Insert case key in lock and rotate key towards you. Lift up the top of the machine and set the wheels by using a wooden stylus or pencil to rotate the wheels in a downward direction; setting each wheel to the month, date and year.
- Page 6 TO CHANGE THE RIBBON: Lift ribbon feeler A and slide ribbon B off shaft C. Accomplish this on both the front rear ribbon feelers. Replace with No. 1000 single or tri-color P,G,R ribbon. Warning: Never attempt to re-ink ribbons, this will only clog the wheel and cause a failure of the machines’...
Need help?
Do you have a question about the E-3 and is the answer not in the manual?
Questions and answers