Related Manuals for ROBINHOOD IC1300
Summary of Contents for ROBINHOOD IC1300
- Page 1 IC1300 Issue: 3 Description: ROBINHOOD IRONING CENTRE Model Number: IC1300 Model pictured: ICI300 All dimensions in mm Model may vary slightly from images pictured...
-
Page 2: Pre-Installation
Please read the entire instructions before installing the Ironing Centre. Robinhood Ironing Centre can be mounted in two ways: Recessed Mount and Surface Mount. For Surface Mount the addition of a decorative surface mounting collar is recommended (Product Code ICSMK). - Page 3 Make sure sold timber studs or mounting points are in suitable position for the mounting of the ironing centre. Due to many different installation possibilities no holes have been provided for these screws, Robinhood suggest making 6 holes of suitable diameter for fixing to the customers preferred location.
- Page 4 Connecting the Ironing Centre to Electric Power For recessed mount, an external ON/OFF (safety) switch for the Ironing Centre must be installed near the unit. An additional power socket can be installed inside the wall between the switch and power plug. Alternatively the unit can be hard wired directly to the switch by an electrician.
- Page 5 Door may be hinged from either side of the cabinet (illustration is shown for left side hinging). Both sides of the cabinet have pre-punched holes. If hanging the door from the right side, please contact Robinhood customer service for a self adhesive badge to cover the existing screen printed logo.
- Page 6 Operating Instructions BOARD RETAINER To open the Ironing Board, lift board retainer and lower the board. To store Ironing Board, follow the steps in reverse order. The Ironing Board can swivel 180 degrees and has three working heights, to adjust the board: With the board in the horizontal position hold the board with one hand near the base (NOT BY THE NOSE) and support the pivot rod with the other hand.
-
Page 7: Lamp Replacement
Board rotation Make sure the door is clear if the board is to be rotated. With the board in the horizontal position hold the board with both hands (NOT BY THE NOSE) and rotate around the centre pivot the unit will click into the required position. NOTE: In order to store the Ironing board, it must be on its lowest position and rotated back. -
Page 8: Important Safety Information
Ironing Centre Features The Robinhood Ironing Centre has the following features: Surface or recess mountable Heat resistant shelf for iron storage Integrated cotton coated cover Right / left hand or no door options Magnetic door catch opening door Round corners board... - Page 9 The product was not used, cleaned or cared for in accordance with our instructions. The product was used outdoors. All Robinhood rangehoods are suitable for indoor use only, and not suitable over BBQs or charcoal cookers designed for outdoor use.
- Page 10 The product was not used, cleaned or cared for in accordance with our instructions. The product was used outdoors. All Robinhood rangehoods are suitable for indoor use only, and not suitable over BBQs or charcoal cookers designed for outdoor use.
Need help?
Do you have a question about the IC1300 and is the answer not in the manual?
Questions and answers
how do i remove cover in robin hood ironing station to replace globe
To replace the globe (lamp) on the ROBINHOOD IC1300 ironing station:
1. Disconnect the Ironing Centre from the power supply and ensure the power is off.
2. Insert a small screwdriver or slim knife to ease the catch to the side.
3. Slip out the diffuser.
4. Replace the lamp (maximum 40 watts).
5. Slide the diffuser back into place until it clicks.
6. Turn the power back on.
The ironing board cover does not need to be removed to replace the lamp.
This answer is automatically generated