Advertisement
5.7.
fit rubber bumpers to the corners. Mount the steel bumper at the front using spacer (D), washer (G), spring washer (H) and nut (f).
rear bumpers are bolted on using screw (C) and washers as before. fit the doors by locating the pins top and bottom into the top and base
assemblies. See fig.7.
fig.7
please log on to www.sealey.co.uk, email sales@sealey.co.uk or telephone 01284 757500.
notE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
ImPORTANT: no liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORmATION: for a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
© Jack Sealey Limited
Parts support is available for this product. To obtain a parts listing and/or diagram,
Environmental Protection.
recycle unwanted materials instead of disposing of them as
waste. All tools, accessories and packaging should be sorted,
taken to a recycling centre and disposed of in a manner which
is compatible with the environment.
Sole UK distributor, Sealey Group,
Kempson Way, Suffolk Business Park,
Bury St. Edmunds, Suffolk,
iP32 7Ar
01284 703534
Original Language Version
www.sealey.co.uk
01284 757500
Web
sales@sealey.co.uk
email
BM33
issue: 1 - 03/03/14
Advertisement
