Do you have a question about the Eurotype and is the answer not in the manual?
Questions and answers
Subscribe to Our Youtube Channel
Summary of Contents for Brailletec Eurotype
Page 1
Tel. +49-(0)6421-8020 Fax +49-(0)6421-80214 Braille & Inc e-mail: brailletec@brailletec.de Internet: www.brailletec.de E U R O T Y P E mechanical braille writer Operating manual Mai 2017 050517 Note taking • Writing • Printing in Braille. If it’s Braille...ask BRAILLETEC...
Platen knobs Reading platform Pressure roller Paper chanal Warning bell 4. Working with the Eurotype Inserting the paper Removing the paper Paper movement lock at the end of the sheet Key lock at the end of the line Writing on Dymo band...
Preface Congratulations on your choice! We are certain you will enjoy your new Eurotype very much. The Eurotype is a modern, quiet mechanical braille writer. It is easy to carry due to its housing-in- tegrated handle. The paper channel system provided on the machine allows you to write on both single sheet paper DIN A4 and DIN A3 and fanfold paper.
Technical data Embossing format Vertical dot spacing 2,5 mm Horizontal dot spacing 2,5 mm Cell spacing 6,0 mm Line spacing 10 mm Paper width max. 300 mm Paper length unlimited Cells per line max. 44 Paper thickness max. 180 g/m² Weights Machine 4,6 kg...
Orientation drawing Left platen knob 13 Back spacer Left margin stop 14 Warning bell on / off Margin release key 15 Right platen knob Line movement key 16 Right margin stop Key for dot 3 17 Right paper release lever Key for dot 2 18 Right Dymo band clip Key for dot 1...
The Elotype can be transported in a convenient manner. Keyboard The Eurotype has 11 keys. The middle one (8), is used for writing blanks (re- cessed for transportation). On the left and right side of this key are located three keys for writing 6-dot braille (5), (6), (7) and (10), (11), (12).
(14) located at the extreme right end. This key will remain depressed. To activate the bell again, simply disengage this key by pulling it up. 3. Working with the Eurotype Inserting the paper There are two possibilities for inserting the paper: 1.
Removing the paper The paper may at any time be removed from the machine. To this end, lift the pa - per release levers (17) or (23) and pull the paper by two hands over the reading platform to remove it from the machine. Line movement lock at the end of the sheet The line movement key (4) will be locked one or two lines before reaching the end of the sheet, depending on how accurately the paper has been inserted.
This will allow you now to move the embossing head easily over the paper to the desired position. Important: Remember again that the Eurotype will only work properly, after the paper has been inserted, if: 1. the paper is left adjusted 2.
Need help?
Do you have a question about the Eurotype and is the answer not in the manual?
Questions and answers