Page 1
SPH010442 Sphere Alarm System: Pet Immune Motion Detector User Guide...
Page 2
Pet Immune Motion Detector Introduction This sensor is meant to be mounted in a room to detect human motion. The device detects human body movement via its infrared sensor and sends a signal to the Base Unit. You can either use the adhesive backing or drill holes in the wall for use with the included anchors and screws.
Page 3
Installation • Open the case and remove the battery’s insulating strip. • Pair with the base station using the Sphere Alarm app. • Fix the bracket with screws to a wall, connect the sensor to bracket, adjust at a proper angle.
Page 4
Operating Instructions Positioning the Motion Detector Overhead View windows door Product Testing • Power on, LED indicator flashes for a second. It then takes about 30 seconds for self-check. • Tester should walk in the detecting area parallel to the wall where the sensor is installed.
Page 5
Replacing the Batteries Press down the hook on sensor with Replace with 2x AA batteries. thumb and push to open the cover. Specifications Working Voltage DC 9V Battery 2 × AA battery (1.5V) ≤15mA Working Current Standby Current 25μA Detection Range 100°...
Page 6
Help & Warranty Info Thank you for purchasing a Sphere Alarm product! We appreciate your business and strive to make your experience the best possible. If you have any issues with your product, please contact us at: support@spherealarm.com Warranty Info This Limited Warranty applies to physical goods sold by Sphere and lasts for a period of one year from the date of sale of the device.
Page 7
This product can be used across EU member states. We declare that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. FCC Approval Number: 2AS7G-SPH010442 Sphere Alarm is a registered trademark of Sphere, 2019. All rights reserved.
Need help?
Do you have a question about the SPH010442 and is the answer not in the manual?
Questions and answers