Philips Beauty Duometricks straight HP4645/01 Instructions For Use Manual page 5

Preparing for use
1 Snap the micro-glide plates or crimper plates onto the appliance
(fig. 1).
2 When you have put the micro-glide plates on the appliance, snap
the removable comb onto the side of the appliance opposite to
the one where the Cool Tip water reservoir is located (fig. 2).
The removable comb will guide the straightener through the hair more
easily.
3 Unscrew the Cool Tip water reservoir from the appliance and fill
it with cold water under a gently running tap (fig. 3).
The appliance can be used with or without water.
4 Keep the appliance upside down and screw the water reservoir
back onto the appliance (fig. 4).
Using the appliance
1 Insert the plug into the wall socket.
There is a ready dot on the appliance.When the appliance has
heated up, the ready dot will change colour to indicate that the
appliance is ready for use.This will take approx. 10 minutes
(fig. 5).
2 While the appliance is heating up, comb or brush your hair so
that it is disentangled and smooth. Use a comb to divide the hair
into locks. Do not put too much hair in one lock (fig. 6).
3 To straighten your hair, take an approx. 2-inch (5 cm) wide lock of
hair, place it between the micro-glide plates and press the handles
of the appliance together. Start straightening at the roots (fig. 7).
4 If you have filled the Cool Tip water reservoir with water, the
appliance will automatically give off steam when you press the
handles together (fig. 8).
5 Move the straightener slowly and steadily towards the end of the
lock (fig. 9).
ENGLISH
5