Advertisement
Quick Links
Reset the socket (Factory mode):
When the output is off (blue LED), press the on-off button for 8 sec,
until you see red LED blinking then you can stop pressing.
The socket will restart itself, then a white LED will show.
Button Control:
Short press – turn on the output (green LED)
Repeated press – turn off the output (blue LED)
APP Control:
Turn on – short press on the socket image (Green icon)
Turn off – repeated press on the socket image (Gray icon)
Overload feature:
If the connected device will overload the socket,
the relay will turn off and the LEDs will blink in light blue and green,
click the button to dismiss.
OTA feature:
Successful ota – LEDs will blink in purple for 1 minute.
4
ALWAYS
SMARTER
Smart Operation System
SOCKET
HIGOAL Group LTD.
www.higoal-group.com
Advertisement
Summary of Contents for HIGOAL Socket
- Page 1 When the output is off (blue LED), press the on-off button for 8 sec, until you see red LED blinking then you can stop pressing. SMARTER The socket will restart itself, then a white LED will show. Button Control: Short press – turn on the output (green LED) Smart Operation System Repeated press –...
- Page 2 White LED: Factory mode | Blue LED: output off Proceed according to the instructions. Green LED: output on The app will start to scan the socket to the wifi, at any time you can use the "CANCEL" button Scanning Instruction: make sure that the LED is white, if not refer to "Reset"...
Need help?
Do you have a question about the Socket and is the answer not in the manual?
Questions and answers