Advertisement
'Previous' button
Connection indication
BASIC FUNCTIONS:
Power-ON:
Press and hold 'Function' wheel AND the 'Intercom' button until the (Main) LED indicator flashes blue.
Power-OFF:
Press and hold 'Function' wheel AND the 'Intercom' button until the (Main) LED indicator flashes red.
Function Channel Pairing:
Press and hold the 'Function' wheel to start searching sequence (fast
Intercom Channel Pairing:
Press and hold the 'Intercom' button to start searching sequence (slow
Volume Up:
Rotate 'Function' wheel anti-clockwise to raise the volume.
Volume Down:
Rotate 'Function' wheel clockwise to lower the volume.
Reset Pairings:
Press and hold the 'Previous' button and the 'Function' wheel at the same time, the LED indicator will flash purple (red & blue).
CONNECTION INDICATION:
When there is a blue light in the connection indication crescent, this means the units are paired and connected.
'A Unit'
(As displayed above, the A unit is connected to the M unit, which is then connected to the B unit this ensures that there is equal distance between the first unit, Master
CONNECTING TWO UNITS:
A Unit
- Press and hold the 'Function' wheel (fast
M Unit
- Press and hold the 'Intercom' button (slow
'A Unit' and 'M Unit' are now paired and connected.
CONNECTING THREE UNITS:
M Unit
- Press and hold the 'Function' wheel (fast
B Unit
- Press and hold the 'Intercom' button (slow
'M Unit' and 'B Unit' are now paired and connected.
To connect more units (up to eight units manufacturer rated, we recommend six) on the last unit paired press and hold the 'Function'
wheel (fast
Red/Blue
flash), while on the new unit you want to add to the 'chain', Press and hold the 'Intercom' button (slow
flash).
When you turn off your units, when you turn them back on, press and release the 'Intercom'
1
INTARIDE S-3 MANUAL
'Next' button
Main LED indicator
(these are not technical terms, just terms we use to identify each connection)
(these are not technical terms, just terms we use to identify each connection)
MODULAR PAIRING SEQUENCE
THE 'M' (MASTER) UNIT SHOULD ALWAYS BE IN THE CENTER OF THE 'CHAIN'
button on the 'M unit' to reconnect them all.
Red/Blue
Red/Blue
'M Unit'
unit and last unit).
Red/Blue
flash).
Red/Blue
flash).
Red/Blue
flash).
Red/Blue
flash).
Intercom button
Function/volume wheel
Charging port and cover
flash).
flash).
'B Unit'
Red/Blue
INTARIDE LTD 2018
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Intaride S-3
- Page 1 INTARIDE S-3 MANUAL ‘Next’ button Intercom button ‘Previous’ button Connection indication Function/volume wheel Charging port and cover Main LED indicator BASIC FUNCTIONS: Power-ON: Press and hold ‘Function’ wheel AND the ‘Intercom’ button until the (Main) LED indicator flashes blue. Power-OFF: Press and hold ‘Function’...
- Page 2 PAIRING TO BIRD-1 Turn your S-3 unit on. Make sure the S-3 IS NOT connected (It can be paired but there should be no audio between any other unit AND no connection indication light). Press and hold the intercom button until the LED indicator is flashing red/blue alternately.
Need help?
Do you have a question about the S-3 and is the answer not in the manual?
Questions and answers