VIDEOPHONE - BOX NTRODUCTION 1.1 P RESENTATION The Videophone-Box allows the administration of video intercom functions in combination with the Videophone soft- ware. After correct installation and commissioning , the following functions are available: Receive calls from the external unit of the video intercom on one of the configured client PCs and use supported ...
VIDEOPHONE - BOX The following scheme shows what functionalities are offered through the Videophone system: Videophone-Box Audio/Video Split Intercom (ex- analogue signals ternal unit) Audio/Video Network (LAN) DIVUSDOMUS Audio/Video Intercom Bus-System with Multime- Audio/Video dia (Client) Network (LAN) Audio/Video...
In the appendix of this manual you can find a list of some compatible intercom systems that already have been tested by DIVUS in combination with Video- phone. For more information about compatibility of certain intercom systems with Videophone or an updated list of the tested products, please contact the technical support of DIVUS.
VIDEOPHONE - BOX 1.4 C ONTENTS OF THE ACKAGE The Videophone-Box is delivered with the following components: Videophone-Box Accessories:: Power supply Audio (VoIP) Power supply Video Network cable RJ45 Audio ( VoIP) Network cable RJ45 Video (Videoserver) ...
VIDEOPHONE - BOX IRING AND ONFIGURATION 2.1 I NTRODUCTION For a better comprehension, please read the following short explanation on how the Videophone-Box works: The Videophone-Box is only used to convert the analogous signals of the intercom system to network-capable signals, so that the VoIP server can handle the signals.
VIDEOPHONE - BOX 2.2 W IRING As already mentioned, the Videophone-Box is divided in 2 parts: 1.) Audio: A VoIP gateway converts the analogous a/b signal from the intercom system into standard VoIP packag- es. The required connections are the following:...
VIDEOPHONE - BOX 2.3 C ONFIGURATION OF THE NTERCOM YSTEM The video intercom system must be configured in a way that – in presence of a telephone call from the external unit – the a/b phone signal and the video signal are activated by the conversion modules of the intercom system. Normally such conversion modules are handled like internal units inside the intercom bus system.
VIDEOPHONE - BOX 2.4.2 P REPARE THE NETWORK CONNECTION In order to access the gateway configuration menu: Ensure that the blue INTERNET port of the VoIP gateway and the PC, over which you want to configure the gateway, are connected to the local net- work.
Page 11
VIDEOPHONE - BOX Address is 192.168.0.120. Connect/Disconnect: With these buttons the connection to the VoIP-Gateway with the specified IP address can be established or aborted. Network: Once the connection to the VoIP-Gateway is established, these fields contain the network parameter of the VoIP-Gateway it self;...
Page 12
VIDEOPHONE - BOX into a configuration file and otherwise to transfer the settings saved in a configu- ration file to the VoIP-Gateway: Save: By clicking on this button, a window will appear, which asks for the name of the new configuration file and the location where to store it.
VIDEOPHONE - BOX 2.4.4 C ONFIGURATION WITH NTERFACCE Open your internet browser and type the following URL into the address bar: http://<IP address of the VoIP gateway>/admin/advanced for default configuration: http://192.168.0.120/admin/advanced configuration menu of the VoIP gateway will appear in the browser window.
Page 14
VIDEOPHONE - BOX In the screenshot on the last page all parameters, that must be changed, already have been highlighted. Below you can find a short explanation of those parameters: “Line Enable”: please set this value on “yes” to activate the VoIP functionality of the gateway ...
VIDEOPHONE - BOX ing dial plan string would be “<S0:dooropener0101@192.168.0.100>“. Take care about the “:” before the “@” inside the string; when missing, the part “@192.168.0.100>” is not added correctly to the rest of the dial plan. The IP address after the “@” is the IP address of the device running the VoIP server; of course, if the used VoIP server runs on a device with another IP address, the “192.168.0.100”...
VIDEOPHONE - BOX 2.5.2 V IDEO ERVER ETWORK ETTINGS Please insert the Videophone CD into your PC and start the program IPEDIT, which can be found in the folder „Tools“. If the video server is already connected to the ...
VIDEOPHONE - BOX 2.5.3 C ONFIGURATION WITH IDEOPHONE ONFIGURATOR Start the Videophone-Box Configurator and open the "Video" tab: IP address: Type in the IP address of the videoserver, you want to connect to; standard IP Address is 192.168.0.120 (refer to the package insert)
Page 18
VIDEOPHONE - BOX Video channels: The videoserver has 4 video channels, but can show only one channel and not more channels contemporaneously. The videoserver offers the possibility to show a selected channel of the 4 channels only or to switch from channel to channel between the selec-...
VIDEOPHONE - BOX 2.5.4 C ONFIGURATION WITH NTERFACE As soon as the configuration menu of the video server is opened within a browser or with the IPEDIT tool, the following screen will appear: NOTE: The graphical interface of the configuration page itself depends on the used browser. The screenshots that are shown in this manual refer to Microsoft Internet Explorer, which guarantees the full access to all settings / functions of the video server.
Page 20
VIDEOPHONE - BOX By clicking on the link "Configuration" in the left column of the screen, further settings of the video server can be edited: System Settings Over this page the system settings of the video server, like for example the device name (which is used to identify the video server within the network), the system time and time zone as well as the ports of the HTTP connection and the vid- eo stream, can be modified.
If the tests listed above cannot be concluded in a positive way, please check the settings of the devices as well as their connections again by confronting them to the values shown within the last chapters. However, if the problems still re- main, please refer to the technical support of DIVUS. Page 21/31...
VIDEOPHONE - BOX ECYCLING NFORMATIONEN English______________________ Information on Disposal of Old Electrical and Electronic Equipment (applicable for EU countries that have adopted separate waste collection systems) Products with the symbol (crossed-out wheeled bin) cannot be disposed as household waste.