Download Print this page

Specifications; Owner's Responsibility; Maintenance - PROFESSIONAL HYDRAULIC JACKS 55100 Operator's Manual

10 ton aluminum hand pump

Advertisement

Specifications

Housing
Pumping
Material
Operation
Aluminum
Single Speed
Read, study, and understand all warnings and operating instructions furnished with this
equipment before use.
This equipment is designed for use only with quality body/frame equipment and attachments.
Use with any other equipment may result in overloading, reduced load capacity, reduced
stability, and/or system failure.
Do not overload, overloading is often indicated by bowing extension tubes or slipping
attachments and can result in personal injury or damage to the equipment.
Maintain proper oil level overfilling may cause damage to, or failure of this equipment.
Do not open filler screw for any reason, unless ram is fully retracted.
Do not connect pump to any ram that is extended or partially extended.
Prior to applying a load, insure that all attachments and extension tubes are fully engaged.
Insure load is centrally applied to attachments and ram saddle to minimize an off center load
condition.
The use of a force gauge to verify the actual load being applied for various types of set-ups
used is recommended.
It is the owner's responsibility to keep decals legible and intact. Replacement decals are
available from authorized service centers or the factory.
Failure to read these warnings may result in loss of load, damage to equipment and/or failure
resulting in property damage, and personal or fatal injury.
Wear safety goggles during the use of this equipment.
Owners Responsibility
The owner and/or operator shall have an understanding of these operating instructions and warnings
before operating this equipment. Warning information shall be emphasized and understood. If the user
is not fluent in English, the instructions and warnings shall be discussed with the operator in the
operator's native language by the purchaser/owner, making sure that the operator comprehends its
contents.

Maintenance

1.When the equipment is not in use, keep the ram retracted and the pump release valve closed.
2.Keep equipment clean. Lubricate moving parts on pump handle. Store in box when not in use. Avoid
sharp kinks in hose.
3.If hydraulic fluid is required, refill at filler screw only with approved jack oil. Total oil capacity is 25
fluid ounces. Usable oil is 22 fluid ounces.
Length
Width
20"
5-1/2"
Net
Height
Weight
5-3/4"
8 lbs

Advertisement

loading