Summary of Contents for TechLogix Networx TL-DA14-F2
- Page 1 User Manual TL-DA14-F2 1x4 HDMI splitter with EDID management and downscaling All Rights Reserved Version: TL-DA14-F2_191025...
- Page 2 TL-DA14-F2 User Manual Preface Read this user manual carefully before using this product. Pictures shown in this manual are for reference only; the actual product may vary. This manual is only for operation instruction only and not for any maintenance or repair.
- Page 3 TL-DA14-F2 User Manual SAFETY PRECAUTIONS To insure proper operation, please read all instructions carefully before using the device. Save this manual for further reference. l Unpack the equipment carefully and save the original box and packing material for possible future shipment l Follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons.
-
Page 4: Table Of Contents
TL-DA14-F2 User Manual Table of Contents 1. Introduction ......................... 5 1.1 Introduction to the TL-DA14-F2 ................. 5 1.2 Features ......................5 1.3 Package Contents ....................5 2. Panel Description ......................6 2.1 Front Panel ......................6 2.2 Rear Panel ......................6 3. -
Page 5: Introduction
4k and 1080p displays in the same installation. Advanced EDID management puts you in control of what resolution the source will output. Notes: 1: HDR content can pass through the TL-DA14-F2 but cannot be processed to properly for 1080p displays. 2: Certain video conversions are not supported: •... -
Page 6: Panel Description
TL-DA14-F2 User Manual 2. Panel Description 2.1 Front Panel Name Description EDID 4 DIP switches for selection of EDID mode Mode Firmware Mini-USB connection for firmware updates only Power Power LED Indicator Indicator Signal Indicates signal link on HDMI input (lit when both source and display... -
Page 7: System Connection
Booyah! 4. Mode Selection The TL-DA14-F2 has [4] 2-position DIP switches labelled “EDID” on the front panel. These switches are used to select the EDID* and operating modes. The switches are labelled 1~4 from left to right, and the switch should be in the down position to be considered ‘ON’. - Page 8 TL-DA14-F2 User Manual Table 4-1 – EDID selection DIP Switch Position Description Pin 2 Pin 3 Pin 4 Off [↑] Off [↑] Off [↑] Ultra HD(8K4K@30) (4K2K@60) – 8/10/12bit 3D HDR video & 7.1ch audio On [↓] Off [↑] Off [↑] Ultra HD(4K2K@60) –...
-
Page 9: Firmware Update Procedure
5. Firmware Update Procedure If a firmware update is required for any reason, the process can be completed by connecting a PC to the Mini-USB port on the front panel of the TL-DA14-F2. Please use the following procedure to successfully complete the update: Save the firmware file (.bin) and the Firmware Update software in the... -
Page 10: Specifications
TL-DA14-F2 User Manual 6. Specifications I/O Connections HDMI Input One HDMI type A receptacle HDMI Outputs Four HDMI type A receptacle DC 5V Power One micro USB Type B port Supported Video and Audio Resolutions 480i, 480p, 576i, 576p, 720p, 1080i, 1080p,... - Page 11 TL-DA14-F2 User Manual Operating Temperature 0° ~ 40° C (+32° ~ +104° F) (Environment) Operating Humidity 20% ~ 90% Non-condensing (Environment) -20° ~ 60° C (-4° ~ +140° F) Storage Temperature (Environment) 20% ~ 90% Non-condensing Storage Humidity (Environment) Power, ESD, Regulatory...
-
Page 12: Panel Drawing
TL-DA14-F2 User Manual 7. Panel Drawing www.tlnetworx.com... -
Page 13: Troubleshooting & Maintenance
Full HD (1920x1080@60hz) l Test with Learning Mode. Set the EDID switches to [Pin2, Pin3, Pin4=↑-↓-↓] and power-cycle the TL-DA14-F2. This will learn the EDID from Output 1. Be sure to connect the display with the lowest resolution to Output 1. -
Page 14: After-Sales Service
TL-DA14-F2 User Manual 9. After-sales Service 1) Product Limited Warranty: We warrant that our products will be free from defects in materials and workmanship for three years. 2) Warranty coverage may be voided when: l The warranty period has expired...
Need help?
Do you have a question about the TL-DA14-F2 and is the answer not in the manual?
Questions and answers