Feiss Newport OL14307 Installation Instructions

Installation Instructions for
Newport Outdoor Post
Outdoor
G ENERAL RODUCT NFORMATION P
This product is safety listed for wet locations.
Incandescent lamps may be dimmed with a standard incandescent dimmer.
LED lamps may be dimmed with a
additional information.
This instruction shows a typical installation.
1A
Connect the fixture to a suitable ground in accordance to local electrical codes.
1
Connect the white fixture wire to the neutral power line wire with a wire nut.
2
Connect the black fixture wire to the hot power line wire with a wire nut.
3
Secure the fixture to the post with the post screws making sure to neatly tuck in all wiring.
4
Insert the diffuser into the fixture frame, then place the frame onto the fixture and secure them together using the frame
5
screws.
Screw the lamp into the socket. Refer to the label on the socket for Max Wattage information.
6
Place the cover onto the frame nipple and secure it in place by screwing the cap onto the nipple.
7
I :
LED dimmer. Consult lamp manufacturer for
COVER
FRAME NIPPLE
DIFFUSER
SOCKET
5
POST SCREW
POST
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
CAP
7
6
FIXTURE
4
FRAME SCREW
4
3 2
1
OL14307
CAUTION RISK OF FIRE -
LAMP
OL14307
1.1