FUNCTION FEATURES This series wireless microphone, it is 32 frequencies PLL for free selection which avoid a stable carrier signal that helps to avoid interference with other frequency channels and allows for easy access to multi-frequencies. The PLL-controlled system provides highly stable. Users can choose from 32 frequencies. PRODUCT INTRODUCTION MAIN SPECIFICATION: 1) PLL phase locked loop, built-in 32 frequencies within 12.4MHz band.
LCD OPERATION LCD DISPLAY OF TRANSMITTER Step 1 Step 2 Step 3 Step 4 Step 5 LCD OPERATION (transmitter and receiver) Step 1: Push SET button once to begin operating frequency selection, then push UP button to increase required frequency, or push DOWN button to reduce frequency.
OPERATION 2- TRANSMITTER Frequency range: 500-980MHz (10 groups) 1) Open the battery cover, in accordance with the correct polarity into 2*1.5V battery. Band width: 12MHz 2) Press power switch, power lamp lighting then going out, it means that the receiver Oscillation: PLL synthesized is on normal working.
Page 5
The full text of the EU declaration of conformity is available at the following internet address: www.tivdio.com Your Retekess radio is designed and tested to comply with a number of national and International standards and guidelines (listed below) for human exposure to radio IC ID frequency electro-magnetic energy.
To avoid electromagnetic interference and/or compatibility conflicts • Contact Retekess for assistance regarding repairs and service. • Turn off your radio in any facility where posted notices instruct you to do so, hospitals or health care facilities (Pacemakers, Hearing Aids and Other Medical Devices) may be using equipment that is sensitive to external RF energy.
Need help?
Do you have a question about the T126 and is the answer not in the manual?
Questions and answers