Page 2
6. Power-off Turn off the power switch of the electric skateboard and remote control. If the electric skateboard and remote control are not operated within 10 minutes, they will shut down automatically.
Page 3
When you use the electric skateboard for the first time, ride on a safe open area and practice basic movement such as standing on the board, accelerat- ing, braking and riding on slow mode to avoid getting injured.
REMOTE CONTROL 1) Display Screen: Real-time speed display, remote control and skateboard power display, remote control signal display, ODO skateboard cumulative and real-time mileage display, speed level, and braking level. 2) Throttle: To move forward, slowly push up on the throttle. To use the brake, pull the throttle back.
Page 5
Fixed-speed cruising mode: Double-click the throttle after desired speed has been reached (the cruising mode can be entered after the speed is above 10 km/h), then release the throttle. Exit by pressing any button. 3) Power Button: Press and hold to turn ON, press again to turn OFF. 4) Speed button regulates the top speed (Low, Med, High, H+).
Page 6
Instead, wait for 30 minutes and charge it when the temperature of the internal battery and the remote control drops. Do not charge the electric skateboard with charging equipment from other brands rather than the original charger; otherwise, it might cause fire and even explosions in serious cases.
MAINTENANCE Bushings: The bushings are an indispensable and important part of skateboard, and users can adjust its tightness according to their weight and riding habits. Soft/loose bushings are easier for turning but it will make it unstable to ride at high speeds;...
WARRANTY Kyng Skateboards offers up to 1 year warranty depending on the part. If you support@kyngstore.com have any issues, please email Part Name Term of Service Service Content Battery 6 months If the battery capacity is over 50%, and it can not be charged, the battery...
Need help?
Do you have a question about the Electric Skateboard and is the answer not in the manual?
Questions and answers
When I plug charger into board the charger blinks green and red and power button on board blinks red while beeping