Advertisement
6a
B
EN
Insert the spindle (1) in the lock. Follow position shown on fig.B relative to the allen screw (9) Place
the inner ring (2) in the right position fig.A. The flap (2a) must point to the ground
Use the plastic piece (3) to centre the inner ring
Screw the inner ring with the supplied screws (4)
(Optional) Use the through bolt screws (5) as shown in fig.A. Hole (5a) for male and (5b) for female
Remove the plastic piece used to centre the inner rose
Adjust the rose (6). The notch (6a) must be inserted on the flap (2a)
Insert the plastic ring (7) in the door handle neck to avoid any scratching when operating
Place the door handle (8) and fix it to the spindle(fig.B) with the allen screw (9)
4
3
5
1
2
A
5a
2a
6
8
7
9
5b
Advertisement
