Advertisement
VIKING
QUICK START GUIDE
See Product Manual for complete installation and programming instructions.
1.0 Out-of-Box
1.1 Verify that you have received all of the parts listed
1.2 Download the product manual
Scan the QR code to
open and download
the product manual
1.3 Download and install the programming software
1. Go to www.vikingelectronics.com and enter K-1900-812L-IP in the search box
2. Click K-1900-812L-IP in the search results
3. Scroll down the page to Downloads, click IP Programming Software
4. Install the programming software by saving or opening the file and then clicking on
setup Viking IP Programming.exe
5. Follow the prompts on your screen to complete software installation
2.0 Power Source
Select PoE Switch or PoE Injector that meets the following requirements:
1. IEEE 802.3af / 802.3at / 802.3bt compliant
2. Capable of providing at least 4 Watts (class 1)
Note: CAT5e (or higher) cable recommended
Electronics, Inc.
K-1900-812L-IP or
K-1900812LIPEWP
X 1
VoIP Entry Phone with
Handset, 12" Cable with
Lanyard and Keypad
X 1
Torx T-10 Security Bit
X 14
Gel-Filled Butt Connectors
- OR -
K-1900-812L-IP or
K-1900812LIPEWP
VoIP Entry Phone System
with Handset & Keypad
January 3, 2020
X 1
X 8
X 1
X 1
X 4
1. Go to www.vikingelectronics.com and
enter K-1900-812L-IP in the search box
2. Click K-1900-812L-IP in the search results
3. Click Product Manual to open and
download the PDF
Cable Assembly
6-32 x 3/4" Flat Head Torx
Drive Screws
Rough In Box
Wire Nut
Kepnut #6
Advertisement
Table of Contents
Related Manuals for Viking Electronics K-1900812LIPEWP
Summary of Contents for Viking Electronics K-1900812LIPEWP
-
Page 1: Power Source
VIKING Electronics, Inc. K-1900-812L-IP or K-1900812LIPEWP QUICK START GUIDE VoIP Entry Phone System with Handset & Keypad January 3, 2020 See Product Manual for complete installation and programming instructions. 1.0 Out-of-Box 1.1 Verify that you have received all of the parts listed... -
Page 2: Features Overview
Questions? Call Viking Product Support: 715-386-8666 Due to the dynamic nature of the product design, the information contained in this document is subject to change without notice. Viking Electronics, and its affiliates and/or subsidiaries assume no responsibility for errors and omissions contained in this information. Revisions of this document or new editions of it may be issued to incorporate such changes.
Need help?
Do you have a question about the K-1900812LIPEWP and is the answer not in the manual?
Questions and answers