Page 1
8 psi (55 kPa, .5 bar) Maximum Working Pressure Important Safety Instructions Read all warnings and instructions in this manual. Save these instructions. Graco Inc. P.O. Box 1441 Minneapolis, MN 55440-1441 Copyright 2005, Graco Inc. is registered to I.S. EN ISO 9001...
Emptying ....... . . 5 Graco Information ......8...
Page 3
Do not alter or modify equipment. • For professional use only. • Use equipment only for its intended purpose. Call your Graco distributor for information. • Route hoses and cables away from traffic areas, sharp edges, moving parts, and hot surfaces. •...
Assembly Assembly 5. Insert the drain tube (H) through threaded opening on top of tank and hand-tighten collar (K) on Numbered panels in F . 1 correspond to the fol- threads. lowing steps. Part callout letters in F . 1, i.e., (A) are referenced throughout this manual.
Operation Operation Emptying 1. To raise or lower the drain bowl (G), loosen knob (L), CAUTION adjust drain tube (H) to desired height, and retighten To ensure pressurization, adjust the drain tube (H) to knob (L). it’s fully extended position before emptying the tank. 2.
Parts Parts Part No/Description Ref. Part No. Description Qty. 119575 O-ring repair kit Includes all o-rings (8) for entire unit. See dashed arrows on parts drawing for locations. 119576 Caster and wheel repair kit Includes wheels (2), washers (2), bolts (2); casters (2), washers (2), lock washers (2), crown nuts (2) 119578 Air valve kit Includes “Y”...
With the exception of any special, extended, or limited warranty published by Graco, Graco will, for a period of twelve months from the date of sale, repair or replace any part of the equipment determined by Graco to be defective.