Advertisement
9
1
DIAGNOSTIC PROCEED
PROCEDURA DI CONTROLLO
- UNIT CHECK LED:
- CONTROLLO LED:
all the leds in the relay
tutti i led del relè si
must come on
devono accendere
- LAST TRIP INDICATION:
- ULTIMA INDICAZIONE DI TRIP:
if present in the relay's
se presente nella memoria
data store
del relè
- LED:
remains on for
- LED:
as long as the 140G-ELTT
resta acceso finchè
Tester is connected to
Tester
the relay
- PRONTO PER TRIP
- READY TO TRIP
Allen-Bradley, Rockwell Software, and Rockwell Automation are trademarks of Rockwell Automation, Inc.
Trademarks not belonging to Rockwell Automation are property of their respective companies.
Publication 140G-IN100A-MU-P - April 2013
DIAGISTIKABLAUF
- EINEITHSPRUF-LED:
Alle LEDs des Relais müssen
aufleuchten
- ANGABE DER LETZTEN AUSLOSUNG:
Wenn im Speicher des Relais
vorhanden.
- LED:
140G-ELTT
bis die Einheit
è connessa al relè
an die Relais angeschlossen ist.
- AUSLOSEBEREIT
LED TRIP TEST DEVICE
Green
Device ON
Dispositivo acceso
2
Einrichtung eingeschaltet
Dispositif allumé
Dispositivo encendido
3
TRIP
140G-ELTT
PROCÉDURE DE DIAGNOSTIC
- UNIT CHECK LED : toutes les
diodes du relais doivent
s'allumer
- LAST TRIP INDICATION :
si présente dans la mémoire
du relais
Bleibt angeschaltet,
- LED:
140G-ELTT Tester
allumée tant que
Tester
- READY TO TRIP
Red
Rosso
Verde
Rot
Grün
Rouge
Vert
Rojo
Verde
Change battery
Sostituire batterie
Batterie ersetzen
Remplacer batteries
Sustituir baterías
PROCEDIMIENTO DIAGNOSTICO
- LED CONTROL UNIDAD: todos los
led del relé se deben
encender
- INDICACION ULTIMA ACTUACION:
si está presente en la memoria
del relé
la DIODE reste
- LED:
queda encendido
140G-ELTT
mientras la
est connectée au relais
permanezca conectada con el relé
- LISTO PARA LA ACTUACION
4
CLACK
Copyright © 2013 Rockwell Automation, Inc. All Rights Reserved.
140G-ELTT Tester
DIR 1000721R0506 (L5086)
Advertisement
