Table of Contents
Advertisement
Adaptor Mode
o The 4590 is a handheld device that can operate as an adapter between
the 4501 programming front and a selected modules in the 3000 series.
This allows for configuration and monitoring of process parameters of
the installed modules.
o Note for connection to a 3000 series product, the PR USB-B to a 2.5
mm jack cable must be used.
o By pressing the power button, the 4590 will power on, and show the
status of the attached 3000 module on the 4501.
o If the 3000 device is powered, the 4501 display will indicate the
Process Variable or can be manually set to go into program mode.
o If the 3000 device is not powered the 4501 display will be in
program mode only.
o Indication of battery level is displayed via the LEDs. This can be
activated by using the Power/Wake-up button. If while pressing the
Power/Wake-up button the LEDs are off, or only one LED is lit, the
batteries should be exchanged. To extend battery life the 4590 will
automatically detect if it is not in use, and will consequently shut itself
down to conserve battery power.
o Battery life in Adaptor Mode is approximately 1 year of daily use,
depending upon battery type.
Connection of ConfigMate 4590 to a PR 3000 Device
8
4590V10 0- IN
CONTENTS
Advertisement
Table of Contents
