Advertisement
INTERNAL RECHARGEABLE BATTERY
DC INPUT
DC OUTPUT
WEIGHT
DIMENSIONS
BRIGHTNESS IN MCD
WATERPROOF DEPTH
AC/DC CHARGER ADAPTER
(Part #7990, sold separately)
POWER DURATION
FLASHLIGHT
1-minute winding
1-watt center LED = 20 minutes
2 side LEDs = 50 minutes
AC/DC CHARGE
1-watt center LED = 8 hours
(Full charge = 8 hrs)
2 side LEDs = 40 hours
Charging CELL PHONE
1–3 minutes winding
3–7 minutes of talk time.
Longer talk times can be reached with more wind-up.
Athena Brands
An Aervoe Industries, Inc. Company
7351inst - CS9/30/08
SPECIFICATIONS
3.6V 800mAh Ni-Mh
6V 200mA
6V 700–800mA
11 oz.
7" X 3" x 2.25" (173mm x 69mm x 56.5mm)
1-watt center LED = 250,000 MCD (20 lm)
2 side LEDs = 30,000 MCD (4 lm)
33' (9.9M)
Input = 120V AC
Output = 6V 300mA DC
FLASHER
1-watt center flasher = 50 minutes
1-watt LED = 40 hours
Wind 'N Go® is a registered trademark of Aervoe Industries, Inc.
1-Watt
Waterproof Flashlight
Advertisement
Table of Contents
Summary of Contents for Aervoe Wind'N Go 7351
-
Page 1: Operating Instructions
CHARGING CELL PHONE 1–3 minutes winding 3–7 minutes of talk time. Longer talk times can be reached with more wind-up. Athena Brands An Aervoe Industries, Inc. Company 7351inst - CS9/30/08 Wind ‘N Go® is a registered trademark of Aervoe Industries, Inc. - Page 2 7351 OPERATING INSTRUCTIONS CHARGING 1-Watt Waterproof Flashlight Note: Before charging, turn flashlight off. namo charging by hand crank 1. Open DYNAMO HAND CRANK and rotate clockwise at approximately 120 cycles/minute SAVE THESE INSTRUCTIONS for a minimum of 1 minute. Winding for longer periods of time will yield longer power durations.
Need help?
Do you have a question about the Wind'N Go 7351 and is the answer not in the manual?
Questions and answers