Advertisement
3. Hold the shaver at a right angle to your skin and move the shaver against the
direction of the hair growth.
4.
After shaving, turn shaver off.
NOTE:
•
Rinse only with cool or warm water, not hot water. Do not rinse with
water hotter than 70°C.
•
Do not submerge the shaver in water for long periods of time.
•
Before dry shaving, make sure that the area is clean, dry and free from
creams or oils.
FOR LONGER HAIRS
1.
Turn on shaver.
2. Hold the shaver with the trimmer facing your leg and slightly tilted towards you
(approximately at a 45º angle).
3. Move the trimmer slowly against the direction of the hair growth.
4.
After shaving, turn shaver off.
FOR BEST SHAVING PERFORMANCE
We recommend that you use your new shaver daily for two or three weeks to allow time
to find the optimum shaving methods for your particular type of hair growth patterns.
CAUTION
If your skin is easily irritated by shaving, or you suffer from skin allergies, you should test
a section of your arm or leg before using the shaver.
CLEANING & MAINTENTANCE
CARE FOR YOUR SHAVER
To ensure long lasting performance of your shaver, clean the head assembly regularly.
The easiest and the most hygienic way to clean the shaver is by rinsing the shaving head
after use with warm water.
AFTER EACH USE
1.
Turn the Shaver OFF
2. Pull the blade assembly from the unit and rinse the blades under running water.
3. Blow on the foils to remove any loose debris.
4.
Brush or rinse the accumulated hair from the main body of the shaver, shaving head
and cutter assembly.
5. Leave the head assembly open to let the shaver dry completely.
6. Return the shaving head to its original position and snap in place.
NOTE:
•
Ensure that the shaver is turned off when cleaning.
•
At regular intervals, put a drop of sewing machine oil onto the foils and
cutters head.
4
Advertisement
