Advertisement
Quick Links
Tabletop Fountain Quick-Start Guide
1.
Unpack and unwrap all the parts; wash
everything to remove dust or debris (dust and
debris can make the water cloudy).
3.
Adjust the feet to make the fountain level.
Check with the included mini-level tool.
"Eyeballing it" doesn't work well.
5.
Attach the tubing to the pump by pushing it
onto the nozzle. It'll be snug.
WARNING: DO NOT ADD WATER WHILE THE FOUNTAIN IS OPERATING.
Adding water while the fountain is operating can lead to accidental overfilling and flooding.
2.
Screw the leveling feet (A) into the holes in the
bottom of the fountain.
4.
Make sure the pump's regulator is full-open
by turning it toward the plus (+) sign.
6.
With one hand, hold the nozzle inside the
cylinder; with the other hand, gently push the
tubing onto the nozzle on the bottom.
Advertisement
Summary of Contents for Quox Creek VORTEX Fountain Tabletop Fountain
- Page 1 Tabletop Fountain Quick-Start Guide Unpack and unwrap all the parts; wash Screw the leveling feet (A) into the holes in the everything to remove dust or debris (dust and bottom of the fountain. debris can make the water cloudy). Adjust the feet to make the fountain level.
- Page 2 Put the pump in the base and drape the cord Put the cylinder onto the base with the over the side, in the notch. pump’s cord threaded through the notch. Add distilled water through the drain grid; Lower the tray around the cylinder and onto NOT pour water into the cylinder itself.